Howard-McCray SF48-S-FF 52.25'' 48.0 cu. ft. Top Mounted 2 Section Solid Door Reach-In Freezer
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
- 2023 model, meets the newest EPA and DOE codes.
Description
Howard-McCray SF48-S-FF Description
Freezer, reach-in, two-section, 48.0 cu. ft. capacity, top mount self-contained refrigeration, (2) solid hinged stainless steel doors, heavy duty locks, (3) epoxy coated shelves per door, electronic controller, auto defrost, interior light, stainless steel interior & exterior, 5" casters, 1/2 HP, 115v/60/1-ph, 16.0 amps, cord with NEMA 5-20P, cULus, UL EPH Classified, UL-Sanitation, NSFOptions
Q & A
Howard-McCray SF48-S-FF Specifications
Freezer Capacity | 48 cu. ft. |
---|---|
Hinge Location | Left/Right |
Half Doors | No |
Construction | Stainless Steel |
Brand | Howard-McCray |
Refrigerant Type | R-404A |
Certifications | 5-20P |
Number of Doors | 2 |
Capacity | 47 - 70 cu. ft. |
Compressor Location | Top Mounted |
Door Type | Solid |
Sections | 2 |
Temperature Range | -5 - 5 Degrees F |
Voltage | 115 Volts |
Width (in) | 52.25 |
Height (in) | 83.00 |
Depth (in) | 36.84 |
Weight | 710.00 |
Additional Information on Howard-McCray SF48-S-FF
Howard-McCray SF48-S-FF Certifications

5-20P
Plug has the neutral blade rotated 90° and shifted so its inner edge is approximately 1⁄2 in (12.7 mm) from the hot blade

cULus
UL (Underwriters Laboratories) approval for the US and Canada

NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.

UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.

UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).