Groen HY-5E HyperSteam™ Convection Steamer

HyperSteam™ Convection Steamer, electric, table top, (1) compartment, (5) 12" x 20" x 2-1/2" deep pans per compartment, stackable, stainless steel construction, dual water connection

• Steamer cavity and cabinet are all stainless steel construction, with removable right and left-side panels, providing access to internal components. Steamer door is all stainless steel with a strong continuous hinge and is field-reversible for left or right-swing, door shall be provided with a one-piece, replaceable seal. Easy-open handle and latch shall provide positive lock and seal when door is pushed or slammed shut. Hidden magnetic door switch cuts power to blower and cuts power to generator when the door is opened. Pan support racks shall be polished stainless steel and removable for easy cleaning. A stainless steel condensate collection tray is positioned under cavity door. 

• Cabinet exterior, including door are all finished to a #3 uniform finish. Cavity interiors are polished stainless steel. Control panel face plates shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and maintaining an attractive appearance. 

• Steamer was UL-listed and Canadian UL-listed. 

• Unit was designed and manufactured to meet NSF requirements and be NSF-listed. Unit shall allow operator to delime steam generator through access port on top without tools or service call. Push button auto-delime feature is standard. 

• Steamer controls include an ON-OFF power button; 60-minute electro-mechanical timer, with continuous steam setting; and READY light which indicates when cavity is ready for steaming. Auto Delime button initiates deliming cycle. 

• Steamer cavity have a powerful side-mounted blower, which increases steam velocity and provides efficient steam distribution throughout cavity and between loaded pans. Steam generator delivers 3.1 KW power input per 2 1/2” deep steam pan. Heat-up time to READY shall be 8-10 minutes or less, under normal conditions. Cavity is kept warm and ready for instant steam between loads. No cavity warm up required, after READY light comes on. DELIME indicator light warns operator of need to delime steam generator. Unit will shut off if water level is low. When power is turned “off”, unit automatically blows down the steam generator to reduce sediment build-up. 

• Unit shall have an electric-heated, rear-mounted steam generator to provide atmospheric steam to the chamber at a temperature of approximately 212°F. Steam generator has an electric water sensor. Electric heating elements are replaceable from the side.

• Unit requires 208, 240 or 480 Volt, single or three-phase electric service. Unit requires dual 3/4” NH cold water supply lines and 2” free venting drain. 

• All steam systems are subject to contamination and failure due to mineral content found in all water supplies. To minimize service problems, a Groen PureSteem™ Water Treatment System is recommended. 

• Designed and manufactured in the United States.

• 4” Adjustable legs
• Treatment System
• Factory stacking kit
• Groen PureSteem™ Water
• Pan racks for support stand
• Stainless steel support stand
• Single water connection (cold water)