Groen HY-3E HyperSteam™ Convection Steamer

HyperSteam™ Convection Steamer, electric, table top, (1) compartment, (3) 12" x 20" x 2-1/2" deep pans per compartment, stackable, stainless steel construction, dual water connection, cUL, UL, NSF, Made in USA

HyperSteam™ Countertop Convection Steamer, electric, (1) compartment, (3) 12" x 20" x 2-1/2" deep pans per compartment, stackable, stainless steel construction, dual water connection, cUL, UL, NSF, Made in USA

• Steamer cavity and cabinet are all stainless steel construction, with removable right and left-side panels providing access to internal components. Steamer door is all stainless steel with a strong continuous hinge and is field-reversible for left or right swing, door shall be air insulated and provided with a one-piece, replaceable seal. 

• Cabinet exterior, including door, is finished to a #3 uniform finish. Cavity interiors are polished stainless steel. Control panel face plates shall be smudge-resistant polyester film, ensuring maximum ease in cleaning and maintaining an attractive appearance. 

• Steamer was UL and Canadian UL-listed. 

• Unit is designed and manufactured to meet NSF requirements and be NSF-listed. Unit shall allow operator to delime steam generator through access port on top, without tools or service call. Push button auto-delime feature is standard. 

• Steamer controls include an ON-OFF power button;Z60-minute electro-mechanical timer, with continuous steam setting; and READY light which indicates when cavity is ready for steaming. AutoDelime button initiates deliming cycle. 

• Steamer cavity have a powerful side-mounted blower, which increases steam velocity and provides efficient steam distribution throughout cavity and between loaded pans. Steam generator delivers 2.6 KW power input per 2-1/2” deep steam pan. Heat-up time to READY shall be 8-10 minutes or less under normal conditions. 

• Unit shall have an electric-heated, rear-mounted steam generator, to provide atmospheric steam to the chamber at a temperature of approximately 212°F. Steam generator has an electric water sensor. 8KW electric heating element is replaceable from the side. 

• Unit requires 208, 240 or 480 Volt, single or three-phase electric service. Unit requires two 3/4” NH cold water supply lines and 1-1/2” free venting drain. 

• All steam systems are subject to contamination and failure due to mineral content found in all water supplies. To minimize service problems, a Groen PureSteem™ Water Treatment System is recommended. 

• Designed and manufactured in the United States.

• 4” adjustable legs
• Treatment System
• Groen PureSteem™ Water
• Pan racks for support stand
• Stainless steel support stand
• Single water connection (coldwater