FWE / Food Warming Equipment Co., Inc. P-144-2-XL 2 Door Heated Banquet Cabinet Holds up to 120-144 Plates, 120 Volts

P-Series Banquet Cart, mobile, (120-144) 12-3/8" diameter covered plate capacity, Humi-temp heat & humidity system, adjustable thermostat, recessed controls, (3) shelves, removable humidifier pan, (2) flush mounted doors, wraparound bumper, push bar handles, stainless steel interior & exterior, 6" casters (2) rigid & (4) swivel with brakes, NSF, UL EPH Classified, cULus

For operators that need a reliable holding cabinet designed to hold plated food in bulk the FWE P-144-2-XL 2 Door Heated Banquet Cabinet is an easy pick. To store up to 144 covered 12-⅜” plates, this cabinet comes with three no-sag shelves that bear the weight without any issues.

To set the temperature the manual controls allow for a setting between 90°F and 190°F in 10-degree increments. Staff can easily check the holding temperature inside the cabinet with a thermometer that doesn’t require electricity to operate. The cabinet is heated by FWE’s Patented Humi-Temp system which uses an Incoloy nickel-chromium alloy heating element. The air is kept nice and moist with a removable baffled humidifier pan and circulated by a fan-cooled blower motor.

To provide easy access to the interior, a full grip latch that closes positively gives access to users. This design is edge-mounted and provides a secure seal every time. To keep heat from escaping the stainless steel door is insulated and an air-tight seal is provided by a cabinet-mounted door gasket.

The cabinet is constructed from stainless steel for durability. The exterior is 20 gauge and features a polished finish that gives the unit a great look that’s easy to maintain. The interior features 22 gauge construction with coved corners for easy cleaning. This cabinet is insulated with UG-26 high-density fiberglass in the bottom, back, sides, and top of this cabinet. This keeps the heat in while saving on power usage.

Moving this cabinet around is a breeze thanks to the 6" maintenance-free polyurethane tire casters. The base of the cabinet features a wraparound bumper that extends past the doors to protect the unit when being moved around. The bumper features a non-marking vinyl cushion that snaps into place to prevent scuffing on doors and walls.

This holding cabinet is UL listed, UL EPH classified as well as being IPX4 and CE certified to meet strict standards.

• Push/pull handles - allows easy maneuvering 
• Heavy-duty “no sag” shelves are removable to facilitate thorough cleaning 
• P-2-XL series’ models holds up to 12.375″ plates. P-2 models are available for up to 11″ plates
• Eye level controls are up-front, recessed protected, easy to read and set, and include a full range °F/°C thermostat for easy operation. Thermometer continuously reads cabinet temperature – even without power source! 
• FWE’s patented Humi-Temp heat and humidity system eliminates hot and cold spots by gently circulating hot, moist air throughout the interior of the cabinet. Humidity can be added to condition circulated heat, keeping food fresh and hot for hours 
• FWE banquet cabinets are constructed for high performance in restaurant and resort banquet operations. Engineered for transport applications - standard, stainless steel, tubular base frame is engineered to absorb vibration and shock during transport 

• ELECTRIC
  • Electronic controls
  • Upgraded element
  • Solar Digital Thermometer
  • 220 volt, 50/60 Hz, single phase
• DOORS
  • Dutch doors
  • Paddle latch
  • Key locking door latch
  • Padlocking transport latch
• CASTERS
  • Floorlock
  • Larger casters
• EXTRAS
  • Dry erase board
  • Menu card holder
  • Cord winder bracket
  • Ergo drop down handle
  • XL Plate carriers: CP or UP
  • Extra shelves - factory installed