FETCO HWD-2110 (H211011) Hot Water Dispenser
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
FETCO HWD-2110 (H211011) Accessories
Description
FETCO HWD-2110 (H211011) Description
The FETCO HWD-2110 (H211011) Hot Water Dispenser is an excellent choice for operators that want a customizable water boiler that comes with a high-resolution display. With the ability to heat up between 9.5 to 13.5 gallons of water per hour at full tilt, this hot water heater can easily keep up with demand.
A high-resolution display clearly shows users the device’s status and capacitive touch pads allow them to easily navigate the menu to change settings as needed. This model allows operators to set a single temperature from 158°F to 203°F to be programmed for simplified use. This model comes with an SD card slot that allows operators to quickly update the software to maintain optimal performance. Hot water is dispensed from a soft silicone tap that protects drinkware from damage.
The stylish yet durable design of this hot water heater is thanks to its mixed material construction. The capacity of the hot water tank in this model is 10 gallons. To heat water quickly this model features a 5.0 kW heater. The electrical configuration is designed to use 200-240v single phase power with a maximum draw of 17.4 to 21.0 amps.
This Water Boiler unit is NSF certified and UL listed. (More Beverage Equipment & Coffee Shop Equipment are available)
Options
Q & A
FETCO HWD-2110 (H211011) Specifications
Control Type | Analog |
---|---|
Temperature Control | Fixed |
Brand | FETCO |
Certifications | NSF |
Capacity | 10 Gallon |
Voltage | 200-240 Volts |
Width (in) | 10.00 |
Height (in) | 24.50 |
Depth (in) | 19.50 |
Weight | 44.00 |
Additional Information on FETCO HWD-2110 (H211011)
FETCO HWD-2110 (H211011) Certifications

NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.