FETCO HWD-2102 (H210230) Hot Water Dispenser

Hot Water Dispenser, 2 gallon, 1-1/2 gpm min flow rate, dispense time range 4 - 40 seconds, single programmable temperature range from 122°F to 207°F (50°- 97°C), lock mode, touch operation, soft silicone tap, drip tray overflow indicator, (3) LED indicator lights, mixed material construction, 1 x 3.2kW heater, 200-240v, 1-ph, 2+G wires, 13.8 max amp draw, 3.3kW, NEMA 6-15P, 8.2 gallons per hour, UL, cUL, NSF

The HWD-2102 (H210230) Hot Water Dispenser from FETCO is an easy pick for any operator that needs a simple to use hot water dispenser with touch operation. This water boiler is designed to heat up to 8.2 gallons of water per hour.

The status of this unit is simple to check with three LED indicator lights. This will let you know if hot water is ready to dispense or if it’s still in a heating cycle. A touchpad unlocks the system and dispenses hot water. This hot water heater can be programmed to provide hot water from 158°F to 203°F. The soft silicone tap on this dispenser protects drinkware from damage.

WIth mixed material construction, this hot water heater is durable enough for heavy back-of-house use but is styled well enough to serve front-of-house with no issue. The internal tank of this model holds 2 gallons of hot water. A 3.2 kW heater quickly heats the water. This unit is designed to use 200-240v single-phase power and draws a maximum of 13.8 amps.

This Hot Water Dispenser model is certified by the National Sanitation Foundation and listed by Underwriter Laboratories. More Beverage Equipment & Coffee Shop Equipment are available.