Everest Refrigeration ESRF2D2 Reach-In Refrigerator/Freezer Combo

Everest Refrigeration ESRF2D2 Description

Reach-In Dual Temperature Refrigerator/Freezer Combo, two-section, 49-5/8"W, 22.0 (R) & 22.0 (F) cu. ft. capacity, self-contained top mounted refrigeration, (1) solid hinged self-closing door (locking) with (3) epoxy coated wire shelves, (1) solid hinged self-closing half-door (locking) with (1) epoxy coated wire shelf, (2) drawers with (1) epoxy coated partition shelf, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, pressure relief port, stainless steel interior, stainless steel sides, galvanized steel top, bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/4 HP (R) & 1/2 HP (F), 115v/60/1-ph, 9.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Full-length air duct system and airflow guard ensure optimal circulation of cold air.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Pressure relief devices allow smooth access to cabinet interior when reopening doors.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Top mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

• Galvanized steel top, bottom and rear.
• 2.5" thick high density polyurethane insulation.
• Four 5" swivel casters with locks on front set a front leg stabilizer.
• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

• High strength, recessed door handles.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Thick gauge, stainless steel drawer frames with low-friction ball bearings.
• Pre-installed door locks keep your items safe from theft (does not apply to drawers).
• Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.

• Height adjustable stainless steel clips.
• Epoxy coated, steel wire shelves (see table for quantity).

• Multi-function digital controller with easy to read LED display.
• Audible overheat protection alarm for compressor and condenser coil.
• Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33°F to 54°F for refrigerators and -10°F to 54°F for freezers.

• Additional shelving.
• 3” swivel casters with locks.
• 3.5” - 6” height-adjustable and interchangeable legs.