Everest Refrigeration EPBNR1-D2 27.75'' 2 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Standard Top
MPN#: EPBNR1-D2
1/2
Free Freight?
Quick Ship
$2,330.00
Log In or Call for The Price
Calculate
Product Protection
Starting at
- 2023 model, meets the newest EPA and DOE codes.
Everest Refrigeration EPBNR1-D2 Specifications
| Nominal Width | 28 Inches |
|---|---|
| Access Type | Drawers |
| Compressor Style | Front Breathing |
| Construction | Stainless and Galvanized Steel |
| Top Type | Standard Top |
| Brand | Everest Refrigeration |
| Refrigerant Type | R-290 |
| Certifications | 5-15P |
| Capacity | 4 - 11 cu. ft. |
| Number of Drawers | 2 |
| Sections | 1 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 27.75 |
| Height (in) | 43.5 |
| Depth (in) | 31.5 |
| Weight | 242.00 |
Additional Information on Everest Refrigeration EPBNR1-D2
warrantysheet.pdf 
overshelfspecsassemblyinstructions.pdf 
ownersmanual.pdf 
accessoriescatalog.pdf 
everest-refrigeration-epbnr1-d2specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Everest Refrigeration EPBNR1-D2 Certifications
5-15P
Two-pole with ground pin plug
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Everest Refrigeration EPBNR1-D2 Description
Drawered Sandwich Prep Table, one-section, 27-3/4"W, 8.0 cu. ft. capacity, self-contained rear mounted refrigeration, stainless steel top with opening for (8) 1/6 size pans, (1) 1/2" thick insulated top lid, (2) heavy duty stainless steel drawers, height adjustable clips, 12-1/4" removable cutting board, digital controls with LED display, auto defrost, front air breathing, stainless steel interior, stainless steel front, top & sides, galvanized steel bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1-ph, 2.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation (drawer pans not included)Standard Features:
Refrigeration System
- Front air breathing for flexibility in installation.
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Full-length air duct system ensures optimal circulation of cold air.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
Cabinet Construction
- Galvanized steel bottom and rear.
- Four 5" swivel casters with locks on front set.
- 2.5" thick high density polyurethane insulation.
- 16 gauge, high quality stainless steel worktop, lid and hood.
- Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
Doors
- Heavy duty stainless steel interior / exterior.
- 2.5" thick high density polyurethane insulation.
- Frame heaters prevent exterior moisture build up.
- High strength, recessed door and drawer handles.
- Self-closing door with adjustable torsion system for a positive seal.
- Thick gauge, stainless steel drawer frames with low-friction ball bearings.
- Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
Preparation Area
- 12 1/4” deep cutting board is removable for ease of cleaning.
- NSF certified polycarbonate 6" deep pans (see table for size and quantity).
- 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
Shelving
- Height adjustable stainless steel clips.
Temperature Control
- Multi-function digital controller with easy to read LED display.
- Audible overheat protection alarm for compressor and condenser coil.
- Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
Options
- Additional shelving.
- 3” swivel casters with locks.
- NSF certified stainless steel double overshelf.
- 3.5” - 6” height-adjustable and interchangeable legs.
Everest Refrigeration EPBNR1-D2 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Everest Refrigeration EPBNR1-D2 to Other Products
Rating
Price
Width (in)
Depth (in)
Height (in)
Sections
Access Type
Number of Doors
Number of Drawers
Compressor Style
Refrigerant Type
Certifications
Price
$2,330.00 27.75
31.5
43.5
1
Drawers
2
Front Breathing
R-290
5-15P
Price
$4,423.00 31.50
720
450
ETL
Price
$2,874.15 48.40
30.30
45.40
5-15P
Price
$2,612.56 27
31
45.38
1
Doors
1
Side / Rear Breathing
R-290
cULus
Price
$2,612.56 27
31
45.38
1
Doors
1
Side / Rear Breathing
R-290
cULus
Price
$2,222.72 60
0
0
2
Doors
2
Side / Rear Breathing
R-134A
5-15P
Items Related to Everest Refrigeration EPBNR1-D2
Commercial Cold Food Pans 2 products
Commercial Food Pans 1674 products
Commercial Sandwich Spreaders 65 products
Sandwich and Salad Prep Tables 1425 products
Catering Supplies 2641 products
Refrigerated Prep Tables 1584 products
