Everest Refrigeration EBF3 74.75'' 67.3 cu. ft. Bottom Mounted 3 Section Solid Door Reach-In Freezer

Reach-In Freezer, three-section, 74-3/4"W, 71.0 cu. ft. capacity, self-contained bottom mounted refrigeration, (3) full-height solid hinged self-closing doors (locking), (9) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, stainless steel interior, stainless steel front & sides, galvanized steel top, bottom & rear, (3) leg stabilizers, (6) 5" swivel casters (3 locking), (2) 1/2 HP, 115v/60/1-ph, 12.0 amps, cord, NEMA 5-20P, NSF, cETLus, ETL-Sanitation

• Time-initiated and temperature-terminated auto defrost heater.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P for model EBF3.
• Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
• Airflow guard ensures optimal circulation of cold air. R290 models include full-length air duct system.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
• High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant.

• Galvanized steel top, bottom and rear.
• 2.5" thick high density polyurethane insulation.
• Deeper cabinet interior for more storage options.
• Six 5" swivel casters with locks on front set and three front leg stabilizers.
• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

• High strength, recessed door handles.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Pre-installed door locks keep your items safe from theft.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.

• Height adjustable stainless steel clips.
• Three epoxy coated, steel wire shelves per section.

• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
• R290 models include audible overheat protection alarm for compressor and condenser coil.

• Left hinged door.
• Additional shelving.
• 3” swivel casters with locks.
• 3.5” – 6” height-adjustable and interchangeable legs.
• Mounting rack assembly for standard full-size sheet pans.