Everest Refrigeration EBD3-BB-24 1 Tap 1/2 and 1/4 Barrel Draft Beer Cooler - Black, 2 Kegs Capacity, 115 Volts
SKU#: EBD3-BB-24
1/2
Free Freight?
Quick Ship
$3,480.00
Log In or Call for The Price
Product Protection
Starting at
- 2023 model, meets the newest EPA and DOE codes.
Everest Refrigeration EBD3-BB-24 Specifications
Number of Taps | 1 Tap |
---|---|
Number of Kegs | 2 Kegs |
Installation Type | Built-In |
Type | Combo Dispensers |
Construction | Stainless and Galvanized Steel |
Brand | Everest Refrigeration |
Refrigerant Type | R-290 |
Certifications | 5-15P |
Exterior Finish | Black |
Sections | 2 |
Style | 1/2 and 1/4 Barrel |
Voltage | 115 Volts |
Width (in) | 68 |
Height (in) | 52.38 |
Depth (in) | 24.5 |
Weight | 310.00 |
Additional Information on Everest Refrigeration EBD3-BB-24
kegcapacitysheet.pdf everest-refrigeration-ebd3-bb-24.specsheet.pdf warranty-sheet.pdf owner-s-manual.pdf accessories-catalog.pdf everest-refrigeration-ebd3-bb-24.specsheet.pdf
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Everest Refrigeration EBD3-BB-24 Certifications
5-15P
Two-pole with ground pin plug
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Everest Refrigeration EBD3-BB-24 Description
Back Bar & Direct Draw Keg Refrigerator Combo, two-section, 68"W, 20.0 cu. ft. capacity, self-contained side mounted refrigeration, (2) solid hinged doors (locking), holds (1) 1/2 barrel & (1) 1/4 barrel keg, (315) 12 oz. can or (210) 12 oz. bottle capacity, (2) epoxy coated wire shelves, (1) 3" diameter insulated stainless steel draft tower (NSF) with air distributor, single faucet, stainless steel countertop, digital controls with LED display, auto defrost, LED interior lighting with on/off switch, textured & laminated black vinyl exterior, galvanized steel interior wall & stainless steel floor, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1-ph, 3.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-SanitationStandard Features:
Refrigeration System
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Full-length air duct system ensures optimal circulation of cold air.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
Cabinet Construction
- Built-in caster thread receptacles for all models.
- 1 3/4" thick high density polyurethane insulation.
- Galvanized steel interior walls and high quality stainless steel floor.
- Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
Lighting
- Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
Doors
- High strength, recessed door handles.
- 1 3/4" thick high density polyurethane insulation
- Pre-installed door locks keep your items safe from theft.
- Textured laminate, black vinyl exterior with galvanized steel interior.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
Draft Arms
- One single faucet 3" diameter, stainless steel draft arm with matching air distributor. Fully insulated and NSF certified.
Shelving
- Two epoxy coated, steel wire shelves.
- Height adjustable stainless steel clips.
Temperature Control
- Factory preset temperature, 35°F.
- Temperature setting range from 33°F to 54°F.
- Multi-function digital controller with easy to read LED display.
- Audible overheat protection alarm for compressor and condenser coil.
Options
- 3” or 5” swivel casters with locks.
- 3.5” – 6” height-adjustable and interchangeable legs.
- Dual or triple faucet draft arms and matching air distributors.
Everest Refrigeration EBD3-BB-24 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Everest Refrigeration EBD3-BB-24 to Other Products
Rating
Price
Width (in)
Depth (in)
Exterior Finish
Height (in)
Number of Taps
Number of Kegs
Style
Voltage
Certifications
Price
$3,480.00 68
24.5
Black
52.38
1 Tap
2 Kegs
1/2 and 1/4 Barrel
115 Volts
5-15P
Price
$3,480.00 68
27
Black
52.38
1 Tap
2 Kegs
1/2 and 1/4 Barrel
115 Volts
5-15P
Price
$3,378.00 58.88
27.13
Black
37
2 Taps
2 Kegs
1/2 Barrel
115 Volts
5-15P
Price
$3,384.51 72.75
24.50
Black
35.75
2 Taps
3 Kegs
1/2 Barrel
120 Volts
5-15P
Price
$3,435.00 57.75
24.5
Black
52.38
1 Tap
1 Keg
1/2 Barrel
115 Volts
5-15P
Price
$3,435.00 57.75
27
Black
52.38
1 Tap
1 Keg
1/2 Barrel
115 Volts
5-15P
Items Related to Everest Refrigeration EBD3-BB-24
Beer Dispensing Tower Heads 1012 products
Glass Chillers and Frosters 91 products
Bar Equipment & Supply 1015 products
Commercial Beer Dispensers 290 products