• A 120-volt/750-watt, 208-volt/712-watt, or 240-volt/ 950-watt tubular heating element is secured to the underside of each well.

• One-piece deep-drawn 304 stainless steel with all corners fully coved. • A 3 ⁄4˝ (19mm) diameter drain with strainers is located in each well and attached to a common copper manifold for ease of draining or filling wells.

• Table body and top are constructed of highly polished 20 gauge 430 series stainless steel. • An adjustable heavy gauge type 430 stainless steel undershelf with gussets, stainless steel 8˝ (203mm)-wide dish shelf, and a removable 73 ⁄4˝ (197mm)-wide poly cutting board are provided. • Legs are 15 ⁄8˝ (41mm) diameter, type 304 stainless steel with stainless steel gussets. • Stationary units feature non-marking stainless steel adjustable bullet feet, which adjust unit height from 341 ⁄2˝ to 351 ⁄2˝. • Portable units include 4˝-diameter NSF-approved ball-bearing swivel casters (two with brake), and push bar attached to end panel at operator’s right. 34˝ height.

• A six-foot (1829mm) cord with plug extends from the bottom of the righthand control side as standard equipment.

Short Form Specifications

Eagle Hot Food Tables, open base design, model SPHT4-208. Top and body to be heavy gauge type 430 stainless steel. Heat compartments shall be one-piece deep-drawn type 304 stainless steel, with all corners fully coved, and insulated on all sides with 1˝ fiberglass or equal. 3 ⁄4˝-diameter drain with strainers in each well, and attached to a common copper manifold. Recessed control panel, with individual infinite controls, offer high and low settings. Each compartment—fitted with 120-volt/750-watt, 208-volt/ 712-watt, or 240-volt/950-watt heating element—is secured to underside of each well. Six foot cord & plug extends from the bottom right hand side of the unit. Furnished with polycarbonate cutting board, stainless steel dish shelf, stainless steel adjustable undershelf, 15 ⁄8˝ O.D. 16/304 stainless steel tubular legs, stainless steel gussets, and 1˝ adjustable bullet feet (stationary units) or 4˝-diameters swivel casters (portable units).

• Individual infinite controls offer high and low selections along with eight other temperature settings. • Indicator light remains on continuously while control is in “ON” position.

Eagle Group SPHT4-208 Electric Hot Food Steam Table with (4) 12" x 20" (Wet/Dry) Sealed Wells and Infinite Controls, 208 Volts

Name: Eagle Group SPHT4-208 Electric Hot Food Steam Table with (4) 12" x 20" (Wet/Dry) Sealed Wells and Infinite Controls, 208 Volts
Brand: Eagle Group
SKU: SPHT4-208
Price: 3497.93 USD
Availability: InStock

MPN#: SPHT4-208

Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).

Free Freight?

Quick Ship

$3,497.93

Product Protection

Starting at

View all Eagle Group Hot Food Serving Counters

Eagle Group SPHT4-208 Accessories

Eagle 421004 Flex-Master Overshelf

$322.49

Eagle 421504 Flex-Master Overshelf

$452.45

Eagle OS-HT4 Overshelf

$559.41

Eagle DOS-HT4 Overshelf

$1,017.29

Eagle SS-HT4 Serving Shelf

$609.22

Eagle SSP-HT4 Serving Shelf

$687.45

Eagle DSSP-HT4 Deluxe Serving Shelf

$1,182.37

Eagle 353987 Dish Shelf

$648.82

Eagle BS1-HT4 Buffet Shelf

$805.59

Eagle BS2-HT4 Buffet Shelf

$835.93

Eagle BS1-HT4-IL Buffet Shelf

$1,397.26

Eagle BS2-HT4-IL Buffet Shelf

$1,433.34

Eagle TS-HT4 Tray Shelf

$676.60

Eagle TS-DB-HT4 Tray Shelf

$717.79

Eagle TSL-HT4 Tray Slide

$554.94

Eagle TSL-DB-HT4 Tray Slide

$597.73

Description

Eagle Group SPHT4-208 Description

Portable Sealed Well Hot Food Table, electric, open base, 66"W x 32-1/4"D x 34"H, wet or dry operation, (4) 12" x 20" stainless steel sealed wells, individual infinite controls, (4) 3/4" drains, drain manifold with valve, includes removable 8"D polyethylene cutting board, stainless steel dish shelf, & adjustable stainless steel undershelf, push bar attached to end panel, 20/430 highly polished stainless steel top & body, 1-5/8" diameter stainless steel tubular legs, 4" diameter swivel casters, 2856 watts, 208v/60/1-ph, 13.7 amps, NEMA 6-20P, NSF, cULus

Options

Options for Eagle Group SPHT4-208

Undershelf option

Bolted in undershelf, add -B model number SURCHARGE: 20% +$679.21

AutoFill®

AutoFill® Automatic Water Fill System, for sealed well hot food tables (SHT & SPHT models), add "A" in front of the dash in model number, NSF & UL approved +$935.64

Flex-Master overshelf kits & overshelves

Flex-Master Overshelf Kit, for 4 well hot food tables +$918.88

Flex-Master Overshelf Kit, with pot rack for 4 well +$1,248.04

Ckitchen's additional options

Welded base setup (crossrails/undershelf) +$140.04

Fully Welded (base and top – top is non-removable) +$208.20

Q & A

Eagle Group SPHT4-208 Electric Hot Food Steam Table with (4) 12" x 20" (Wet/Dry) Sealed Wells and Infinite Controls, 208 Volts

Eagle Group SPHT4-208 Specifications

Number of Wells	4
Product Line	Commercial Electric Steam Table
Well Type	Sealed Well
Base Style	Undershelf
Brand	Eagle Group
Certifications	cULus
Power Type	Electric
Control Type	Infinite
Type	Mobile
Capacity	(4) 12" x 20" (Wet/Dry) Sealed Wells
Heat	Electric
Material	Stainless Steel
Voltage	208 Volts
Width (in)	66
Height (in)	34
Depth (in)	32.25
Weight	162

Additional Information on Eagle Group SPHT4-208

Features
Heating element:	• A 120-volt/750-watt, 208-volt/712-watt, or 240-volt/ 950-watt tubular heating element is secured to the underside of each well.
Heat compartments:	• One-piece deep-drawn 304 stainless steel with all corners fully coved. • A 3 ⁄4˝ (19mm) diameter drain with strainers is located in each well and attached to a common copper manifold for ease of draining or filling wells.
Construction:	• Table body and top are constructed of highly polished 20 gauge 430 series stainless steel. • An adjustable heavy gauge type 430 stainless steel undershelf with gussets, stainless steel 8˝ (203mm)-wide dish shelf, and a removable 73 ⁄4˝ (197mm)-wide poly cutting board are provided. • Legs are 15 ⁄8˝ (41mm) diameter, type 304 stainless steel with stainless steel gussets. • Stationary units feature non-marking stainless steel adjustable bullet feet, which adjust unit height from 341 ⁄2˝ to 351 ⁄2˝. • Portable units include 4˝-diameter NSF-approved ball-bearing swivel casters (two with brake), and push bar attached to end panel at operator’s right. 34˝ height.
Electrical:	• A six-foot (1829mm) cord with plug extends from the bottom of the righthand control side as standard equipment.
Short Form Specifications:	Eagle Hot Food Tables, open base design, model SPHT4-208. Top and body to be heavy gauge type 430 stainless steel. Heat compartments shall be one-piece deep-drawn type 304 stainless steel, with all corners fully coved, and insulated on all sides with 1˝ fiberglass or equal. 3 ⁄4˝-diameter drain with strainers in each well, and attached to a common copper manifold. Recessed control panel, with individual infinite controls, offer high and low settings. Each compartment—fitted with 120-volt/750-watt, 208-volt/ 712-watt, or 240-volt/950-watt heating element—is secured to underside of each well. Six foot cord & plug extends from the bottom right hand side of the unit. Furnished with polycarbonate cutting board, stainless steel dish shelf, stainless steel adjustable undershelf, 15 ⁄8˝ O.D. 16/304 stainless steel tubular legs, stainless steel gussets, and 1˝ adjustable bullet feet (stationary units) or 4˝-diameters swivel casters (portable units).
Controls:	• Individual infinite controls offer high and low selections along with eight other temperature settings. • Indicator light remains on continuously while control is in “ON” position.