Beverage Air SPED60HC-08C-4 60'' 4 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air SPED60HC-08C-4 Accessories
Description
Beverage Air SPED60HC-08C-4 Description
Sandwich Top Refrigerated Counter, two-section, 60"W, 16.0 cu. ft. capacity, (4) drawers (upper & lower pull-out drawers accommodate 6" deep pans), stainless steel top with opening for (8) 1/6 size pans (pans furnished are 4" deep, tops will accommodate 6" deep pans), 17" polyethylene cutting board, stainless steel exterior with galvanized steel back & bottom, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAThe Beverage Air SPED60HC-08C-4 Elite Series™ Sandwich Top Refrigerated Counter is a prep table offering four refrigerated drawers and eight 1/6 pans for chilled ingredients. The drawer sections below the worktop offer 16.02 cu. ft. of storage space and are designed to hold pans up to 6" deep for storing larger amounts of prepped food.
The temperature inside the drawers is constantly maintained to be between 36º and 38ºF to maximize the shelf life of food. Stainless steel frames are used to support the telescoping drawer slides for effortless access to ingredients. The drawers feature slides with a locking mechanism to prevent them from being pulled out of the cabinet accidentally.
The worktop includes a polyethylene cutting board that runs the full width of the counter. This extended cutting board is 17” deep providing a spacious work area to prep ingredients and assemble sandwiches. The cutting board is easy to remove for cleaning and maintenance. Ingredients and condiments in the eight pans are kept between 41°F and 33°F with optimized airflow to maximize shelf life.
The bottom-mounted refrigeration system saves space and provides efficient cooling. The self-contained refrigeration system has a ⅓ HP compressor that provides 1549 BTU/hr of cooling with hydrocarbon-based R290 refrigerant which is compliant to all modern environmental codes. The refrigeration system features full electronic control to efficiently control the temperature and a condensate evaporator that eliminates the need for a floor drain.
This unit is configured to use standard 115v/60/1-ph power and comes with an eight-foot power cord with a NEMA 5-15P plug set.
Options
Q & A
Beverage Air SPED60HC-08C-4 Specifications
| Nominal Width | 60 Inches |
|---|---|
| Top Type | Cutting Top |
| Access Type | Drawers |
| Compressor Style | Side / Rear Breathing |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Certifications | cULus |
| Capacity | 12 - 18 cu. ft. |
| Number of Drawers | 4 |
| Sections | 2 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 60 |
| Height (in) | 45 |
| Depth (in) | 38.38 |
| Weight | 360.00 |
Additional Information on Beverage Air SPED60HC-08C-4
Beverage Air SPED60HC-08C-4 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Compare Beverage Air SPED60HC-08C-4 to Other Products
Items Related to Beverage Air SPED60HC-08C-4
