Beverage Air SPE48HC-18M-DS 48'' 2 Door Counter Height Mega Top Refrigerated Sandwich / Salad Prep Table

Beverage Air SPE48HC-18M-DS Description

Dual Side Mega Top Refrigerated Counter, two-section, 48"W, 13.01 cu. ft., (2) doors, stainless steel top with opening for (18) 1/6 size pans, (1) 10" & (1) 12" cutting board, (4) shelves, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans), R290 Hydrocarbon refrigerant, 1/6 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The SPE48HC-18M-DS Elite Series™ Dual Side Mega Top from Beverage Air is a dual-sided prep table featuring two refrigerated reach-in sections. The worktop has a refrigerated bunker holding eighteen ⅙ pans which can be accessed from either side. The side which has access to the reach-in sections has a 10” deep cutting board and the opposite side has a 12” deep one, both are removable for cleaning and run the full width of the workspace. The reach-in sections offer 13.01 cu. ft. of space and each section has two epoxy-coated steel wire shelves for organizing items.

The interior is made from corrosion-resistant aluminum making it easy to clean and maintain. The stainless steel doors are self-closing to make sure a cool 36º to 38ºF is maintained with as little power consumption as possible. When multiple items need to be moved in or out of the reach-in sections, the doors can be opened to 120˚ and they will automatically stay open. The doors feature snap-in gaskets that are easy to remove for maintenance and cleaning.

Both sides of the unit provide access to the ingredients and condiments inside the refrigerated pan sections through separate lids. Sandwich and salad ingredients are kept nice and cool inside the refrigerated bunker.

The bottom-mounted refrigeration system uses R290 hydrocarbon refrigerant and a ⅙ HP compressor to efficiently provide 1094 BTU/hr of cooling. The refrigeration system features full electronic control and an epoxy coated evaporator coil to maximize efficiency.

An eight-foot-long power cord comes prewired with a NEMA 5-15P plug set to connect the prep table to a standard 115v/60/1-ph power outlet that safely delivers 2.2 amps of current.

Keep your food items fresh and chilled during your food prep with this Beverage Air SPE48HC-18M-DS Elite Series? Dual Side Mega Top Refrigerated. This worktable is 46.50 inches tall, 48 inches wide, and 48.63 inches deep.

• SPE Elite Series - Mega Top, Dual Sided
  • Dual Sided Prep Table Cabinets are accessible from front and back.
  • Fifty percent greater pan capacity than the all around standard prep table. 
  • Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient.
  • Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket. 
  • Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
• Cabinet Construction
  • A plug in type vinyl magnetic gasket is attached to each door for positive seal. 
  • Removable hoods and insulated lid(s) assemblies are made of matching stainless steel.
  • Six-inch casters, 2 with brakes, are standard. 3-inch casters and 6” legs are available as an option.
  • Exterior construction includes heavy-duty stainless steel finish on front, back, sides, top, and door(s). 
  • Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. 
  • Doors are mounted to face of cabinet on cartridge style hinges permitting them to self close. Hinges also allow doors to stay open 120°. 
  • Two epoxy-coated steel wire shelves per section are supplied as standard. Pans furnished are 4” deep and made of polycarbonate plastic.
  • Door handles are made from extruded aluminum with a black anodized finish. They are contoured to permit easy opening of doors with fingers from both top and bottom of handle.
  • One (1) 10” deep and one (1) 12” deep, full length removable cutting boards constructed of high-density white polyethylene plastic are supplied with cabinet. These are readily removable for cleaning. 
• Refrigeration System
  • More robust refrigeration system provides added capacity and efficiency. 
  • Automatic condensate evaporator is provided to eliminate the need of floor drains. 
  • Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. 
  • Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet.
  • Systems are designed using CFC and HCFC-free R134a refrigerant and capillary tube between condenser and evaporator.
• Electrical Connection
  • Units pre-wired at factory and include 8’ long cord and plug