Beverage Air DW64HC-B Bottle Cooler

Bottle Cooler, flat top, 65"W x 26-1/2"D x 33-3/4"H, 18.5 cu. ft., (2) sliding lids, (4) adjustable epoxy coated wire dividers, case capacity: 25-1/4 cases (12 oz. bottles) or 34-3/4 cases (12 oz. cans), deep well design, bottle cap opener & cap catcher, black painted steel exterior, galvanized interior, stainless steel top, self-contained refrigeration system, R290 Hydrocarbon Refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

For operations that need to quickly cool canned or bottled beverages and store them in a secure and convenient package the Beverage Air DW64HC-B Bottle Cooler is a good solution. With its easy to clean black vinyl on steel exterior, it’s built to last and will maintain its looks for many years to come. With 18.5 cu. ft. of capacity this unit can hold up to 34 ¾ cases of 12 oz. cans or 25 ¼ cases of 12 oz. bottles.

This unit comes with a stainless steel countertop with integral glass stops for a secure serving platform and two stainless steel sliding lids that glide effortlessly. To make serving bottled drinks as easy as possible this unit comes with a cap lifter and catcher unit. This makes opening bottles a simple one-step process without needing to worry about dealing with the bottle caps. To keep bottles and cans sorted inside, four epoxy-coated dividers are included. Everything inside is quickly, and evenly, cooled by the high RPM cooling fans that regulate the temperature between 36° and 40°F.

This unit comes with self-contained refrigeration that utilizes a ¼ HP compressor putting out 1702 BTU/hr of cooling. To make sure the refrigeration system will run reliably for many years the evaporator coil features an epoxy coating. This along with the fully electronic controls make sure the temperature inside stays constant while drawing as little power as possible. Eco-friendly R290 hydrocarbon refrigerant is used by this unit to meet all environmental regulations. Automatic non-electric defrosting keeps downtime to a minimum to maintain the unit's efficiency.

The unit is easy to attach to a standard 115v/60/1-ph power source with its factory wired 8’ power cord with NEMA 5-15P plug set.