Beverage Air BB72HC-1-GS-S Black 3 Glass Door Refrigerated Back Bar Storage Cabinet, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air BB72HC-1-GS-S Specifications
Number of Kegs | 3 Kegs |
---|---|
Interior Construction | Shelves |
Construction | Stainless and Galvanized Steel |
Cabinet Type | Storage Cabinets |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Certifications | cULus |
Door Style | Sliding |
Number of Doors | 3 |
Control Type | Manual |
Capacity | 19.92 cu. ft. |
Color | Stainless Steel |
Door Type | Glass |
Sections | 3 |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 34 |
Depth (in) | 23.63 |
Weight | 381.00 |
Additional Information on Beverage Air BB72HC-1-GS-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air BB72HC-1-GS-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air BB72HC-1-GS-S Description
If your establishment has a tight back bar area and you need a low profile refrigerated solution the BB72HC-1-GS-S Refrigerated Back Bar Storage Cabinet from Beverage Air is a good choice. The sliding glass doors on this unit provide a clear view of the available items while staying out of the way. With 19.92 cu. ft. of capacity, this unit has plenty of room to stock multiple beverages that are easy to access. Alternatively, the interior can hold up to three ½ kegs.
This unit features sliding glass doors that stay out of the way of other users in a busy back bar environment. To prevent the doors from being left open, they feature a self-closing mechanism but to make accessing multiple items easier the doors also have a stay-open feature for convenience. The LED lighting makes sure all items inside are well lit for easy identification. Each section comes standard with two epoxy-coated shelves to organize items. With forced-air refrigeration, this unit can quickly chill products to make sure restocked items are served at the right temperature.
Cooling is provided by a side-mounted refrigeration system utilizing a ⅓ HP compressor that provides 1942 BTU/hr of cooling. To best fit your establishment the refrigeration system can be ordered on either side. To make sure the refrigeration system will run reliably for many years the evaporator coil features an epoxy coating. This along with the fully electronic controls make sure the temperature inside stays between 36ºF and 38ºF while drawing as little power as possible. Eco-friendly R290 hydrocarbon refrigerant has a low impact on the environment and it meets all regulations while proving safe sustainable cooling. The non-electric defrost cycle is extremely convenient and reduces downtime.
An eight-foot power cable comes prewired from the factory with a NEMA 5-15P plug set for use with standard 115v/60/1-ph power at 3.1 amps.
Keep your bar area looking stylish as well as organized with this top-notch Beverage Air BB72HC-1-GS-S Refrigerated Back Bar Storage Cabinet. This backbar storage cabinet is 34 inches tall, 72 inches wide, and 23.50 inches deep.
- Cabinet Construction
- LED lighting
- Self-closing doors
- Full electronic control
- Galvanized sub-top standard
- Black or stainless steel exterior
- Heavy duty stainless steel floor
- Stay-open feature & lock standard
- Two (2) epoxy coated shelves per section, standard
- Interior construction utilizes galvanized steel on walls and ceiling
- Compressor available on left or right, specify at time of unit order
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Balanced forced-air refrigeration system provides rapid chilling of product
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wire shelf dividers
- Solid or Glass Door
- 2” Stainless steel top
- 3”-6” casters or 6” black legs
- Wine model (40º-60º models)
- Pass-thru & food rated models available
- Electrical Connection
- Units pre-wired at factory and include 8’ long cord and plug set.
Beverage Air BB72HC-1-GS-S Accessories
Beverage Air BB72HC-1-GS-S Reviews
There are no reviews yet for this product.