Beverage Air BB72HC-1-F-S Black 3 Solid Door Refrigerated Back Bar Storage Cabinet, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air BB72HC-1-F-S Specifications
Number of Kegs | 3 Kegs |
---|---|
Interior Construction | Shelves |
Construction | Stainless and Galvanized Steel |
Cabinet Type | Storage Cabinets |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Certifications | cULus |
Door Style | Swing |
Number of Doors | 3 |
Control Type | Manual |
Capacity | 19.92 cu. ft. |
Color | Stainless Steel |
Door Type | Solid |
Sections | 3 |
Voltage | 115 Volts |
Width (in) | 72 |
Height (in) | 34 |
Depth (in) | 24.5 |
Weight | 359.00 |
Additional Information on Beverage Air BB72HC-1-F-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air BB72HC-1-F-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air BB72HC-1-F-S Description
Your bar will run like a well-oiled machine when you organize and store your supplies using the Beverage Air BB72HC-1-F-S Refrigerated Food Rated Back Bar Storage Cabinet. This backbar storage cabinet is 34 inches tall, 72 inches wide, and 23.50 inches deep.
- BB 23” Base Series - Back Bar Refrigerator Open Food Rated
- Food Rated models are certified for bottled beverages, packaged food, and open food.
- Shallow depth, back bar, self-contained refrigerators come in two widths of 48” and 72.”
- Two heights include 34” with standard galvanized steel top for under shelf application and 36” when adapted with a 2” stainless steel top (specify –27). Depth is 23” from face of door to back of cabinet. Handle projects 1/2.” Solid door models come standard with locks.
- Cabinet Construction
- Doors include magnetic gaskets for positive seal.
- Two (2) epoxy-coated shelves per section standard.
- Stainless steel exterior option available (-S models).
- Standard, cabinet exterior construction includes black steel finish.
- Interior, incandescent, lighting is standard with manual on/off switch.
- Galvanized sub top standard. 2” stainless steel top optional (specify –27).
- Hinged solid doors are self-closing and include a 90° stay-open feature and locks.
- Reinforced floor made from heavy-duty stainless steel to provide long lasting service.
- All stainless steel interior with radius corners is easy to keep clean and meets NSF Standard 7 for open food containers.
- Foamed-in-place CFC and HCFC-free polyurethane insulation enhances the structural strength of the cabinet and helps increase energy efficiency.
- Refrigeration System
- Condensate elimination is automatic and non-electric.
- Forced air is projected the length of cabinet across the ceiling.
- Remote refrigeration models include expansion valve installed.
- Refrigeration is fully accessible behind grille to right side of cabinet.
- Evaporator located above condensing unit permits full use of interior spaces.
- Refrigeration system uses R134a refrigerant, which is CFC and HCFC-free for compliance with environmental safety concerns.
- Available Options
- Wire shelf dividers
- 3” or 6” casters; 6” legs
- WINE models available (40°- 60°F models)
- Electrical Connection
- Units wired at factory and ready for connection to a 115/60/1 phase, 15 amp dedicated outlet. 8’ long cord and plug set included.
Beverage Air BB72HC-1-F-S Accessories
Beverage Air BB72HC-1-F-S Reviews
There are no reviews yet for this product.