ACCUREX Baffle Filter Canopy Hood, Single Island Style, Face Supply
MPN#: XBFV
1/2
Additional Information on ACCUREX XBFV
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
ACCUREX XBFV Description
Provide Accurex Exhaust Hood Model XBFV as shown on plans and in accordance with the following
specification:
Kitchen ventilation hood(s) shall be Type I, full compensating single island canopy. The hood(s) shall be
U.L. 710 Listed without a fire damper (with optional) for 400°F, 600°F, or 700°F rated cooking appliances.
The hood(s) shall be single canopy, exhausting two banks of filters through one central plenum, and shall
have the capability to replace up to 100% of the exhausted air with fresh outside air. Make-up air shall be
provided at low velocity through perforated panels (registers optional) located on the face of the hood,
designed to limit throw to several feet in front of the hood. Please visit www.ul.com for U.L. 710 listing for
performance and size options.
The hood(s) exterior shall be constructed of a minimum of 18 gauge 400 series stainless steel (300 series
optional). The hood(s) shall be constructed using the standing seam method for optimum strength and
with a Performance Enhancing Lip (PEL) to improve capture efficiency by turning air back into the hood.
All seams, joints and penetrations of the hood enclosure shall be welded and/or liquid tight. Lighter
material gauges, alternate material types and finishes are not acceptable. All unexposed interior surfaces
shall be constructed of a minimum 18-gauge corrosion resistant steel including, but not limited to ducts,
plenum, and brackets.
The hood(s) shall include a filter housing constructed of the same material as the hood. The filters shall
be stainless steel baffle type (non-stick coating optional), U.L. 1046 Classified, and in sufficient number
and size to ensure optimum performance. The filter housing shall terminate in a pitched, full length grease
trough which shall drain into a removable grease container. These filters shall have a grease removal
efficiency of 28% at 8 microns (16% from 3-10 microns) and static pressure drop of 0.5-0.6 inWC.
Vapor proof, U.L. Listed incandescent (recessed, fluorescent and LED optional, restrictions apply) light
fixtures shall be pre-wired to a junction box located at the top of the hood for field connection. Wiring shall
conform to the requirements of the NFPA® 70.
ACCUREX XBFV Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to ACCUREX XBFV
Commercial Exhaust Hoods 402 products
