Vulcan VFRY18 V Series 15 - 50 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 70,000 BTU
Energy Star ?Chat Now
Calculate
- Please see specification sheet for installation clearance requirements
- Requires optional flue with back-splash or back-shelf.
- Additional required flue riser sold separately
Vulcan VFRY18 Specifications
| Total BTU | 70,000 BTU |
|---|---|
| Installation Type | Floor Model |
| Control Type | Solid State |
| Construction | Stainless Steel |
| Burner Style | Tube |
| Series | V Series |
| Brand | Vulcan |
| Energy Efficiency | Energy Star |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Power Type | Gas |
| Basket Lifts | No |
| BTU | 70,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Solid State Analog Knob |
| Capacity | 15 - 50 lb. |
| Heat | Natural or Propane Gas |
| Width (in) | 18 |
| Height (in) | 48.38 |
| Depth (in) | 40 |
| Weight | 215.00 |
Additional Information on Vulcan VFRY18
installation-operation.pdf 
sell-sheet.pdf 
owner-s-manual.pdf 
warranty.pdf 
vulcan-vfry18.specsheet.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan VFRY18 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan VFRY18 Description
The VFRY18 V Series Heavy Duty Range Match Fryer from Vulcan was designed from the ground up for efficiency and ease of use and has 45-50 lbs of oil capacity. This fryer is ENERGYSTAR® qualified and is one of the most efficient Commercial Deep Fryers they have tested. To keep up with high volume frying Floor Model Gas Fryers from Vulcan are an easy pick
Vulcan’s ThreePass™ heat transfer system is an ingenious piece of engineering that looks like it belongs on a racecar. This heat transfer system uses heat exchange tubes with two bends that extend the surface area of the gas tubes as burning gas moves through it. This allows it to use more of the heat that would otherwise be expelled by other fryers. The groundbreaking design of the heat transfer system yields this fryer with 72% thermal efficiency and 60.9% cooking efficiency. The SoftStart™ ignition system on this fryer reduces the burn rate while extending the life of the oil.
The cooking temperature is easily adjusted with a simple analog knob behind the door which allows for temperatures from 200° to 390°F. To make using this fryer simple it features electronic ignition and fat melt modes.
The stainless steel construction of the cabinet and fry tank make this fryer durable and easy to clean. This fryer comes mounted on adjustable 6” casters making it easy to move around while keeping it level. This fryer uses 120v power and has a total gas input of 70,000 BTU/hr.
- Hi-limit shut off
- Boil Out ByPass™
- 70,000 BTU/hr. input
- Drain valve interlock switch
- 1 1⁄4" port ball type drain valve
- 1 1⁄4" Diameter front gas manifold
- 3⁄4" Rear gas connection (capped)
- Solid state behind the door controls
- Electronic ignition (120 volt/60/1) (NEMA 5-15P)
- Stainless steel front, front top ledge, sides, fry tank, base, and stub back
- One year limited parts and labor warranty & 5 year limited fry tank warranty
- Energy saving Soft Start ignition system extends oil life while requiring lower BTU's
- Energy efficient ThreePass™ heat transfer system yielding 60.9% cooking efficiency and 72% thermal efficiency. ENERGY STAR® qualified.
- Flanged feet
- Cap and cover front manifold
- 10" high side splash (removable)
- Set of 4 casters, 6" high (two locking)
- Stainless steel tank cover, doubles as work-top surface
- Single bulk baskets
- Extra set of twin baskets
- Flexible gas hose with quick disconnect & restraining device
- Common condiment type, telescoping plate rails (starting at 24" length)
45-50 lbs. capacity Heavy Duty range match fryers, Vulcan model No. VFRY18, 70,000 BTU/hr. input. Stainless steel fry tank with ThreePass™ heat transfer system, ENERGY STAR® qualified. Electronic ignition (120V/60/1). Solid state analog knob control. Stainless steel front, front top ledge, sides and base. Units standard on 6" legs. 1 1⁄4" front gas manifold and 3⁄4" rear gas connection, capped.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan VFRY18 Accessories
Vulcan VFRY18 Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan VFRY18
