Vulcan K20EL Stationary Kettle
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Description
Vulcan K20EL Description
Stationary Kettle, Electric, 20-gallon true working capacity, 2/3 jacketed, 316 series stainless steel liner with ellipsoidal bottom, spring assist cover with condensate ring, 2" compression draw-off valve with perforated strainer, faucet bracket 130° right of draw-off, stainless steel construction, tri-leg base, cULus, UL EPH, ANSI/NSF 4, ASME
Stationary Kettle, Electric, 20-gallon true working capacity, 2/3 jacketed, 316 series stainless steel liner with ellipsoidal bottom, spring assist cover with condensate ring, 2" compression draw-off valve with perforated strainer, faucet bracket 130° right of draw-off, stainless steel construction, tri-leg base, cULus, UL EPH, ANSI/NSF 4, ASME
Standard Features:
Electric self-contained, stainless steel, 2⁄3 jacketed floor mounted stationary steam kettle. Ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with (1⁄4 x 5⁄8 inch 20 gallons) (3⁄8 x 1 inch 40 gallons and greater) bar rim, embossed gallon/liter markings and faucet bracket. 50 psi (3.4 kg/cm2) steam jacket rating. Spring assist hinged stainless steel cover with condensate ring and drop down lift handle. Two inch compression tangent draw-off valve with perforated strainer. Tubular stainless steel legs with flanged feet. Stainless steel enclosure for “water resistant” controls. Controls include a power switch, power “on” light, solid state temperature control, vacuum/pressure gauge, pressure relief valve, low water light and low water shut-off. UL listed. UL Classified for sanitation in accordance with ANSI/NSF Standard #4. Meets ASME
Standard Features:
- Faucet bracket.
- Embossed gallon/liter markings.
- 50 psi (3.4 kg/cm2) steam jacket rating.
- One year limited parts and labor warranty.
- Tubular stainless steel legs with flanged feet.
- Stainless steel enclosure for “water resistant” controls.
- Two inch compression tangent draw-off valve with perforated strainer.
- Bar rim (1⁄4 x 5⁄8 inch 20 gallons) (3⁄8 x 1 inch 40 gallons and greater).
- Spring assist hinged stainless steel cover with condensate ring and drop down lift handle.
- Electric self-contained, stainless steel, 2⁄3 jacketed floor mounted stationary steam kettle.
- Ellipsoidal bottom kettle liner formed and fully welded standard type 316 and type 304 stainless steel exterior.
- Controls include a power switch, power “on” light, solid state temperature control, vacuum/pressure gauge, pressure relief valve, low water light and low water shut-off.
- Correction facility package:
- Security type fasteners with tack welds.
- Stainless steel step over draw-off valve with chain.
- 480 volt, 60 Hz, 3 phase power supply.
- Increase to 33 kW for 60 gallon models (3 phase only)
- Second year extended limited parts and labor warranty.
- Increase to 24 kW for 40 - 60 gallon models (3 phase only).
- Two inch plug tangent draw-off valve with perforated strainer.
- Three inch compression tangent draw-off valve with perforated strainer.
- Solid disk.
- Stainless steel 48" whip.
- Double pantry pot filler with lead-free vacuum breaker.
- (12") (18" double jointed) single pantry lead-free faucet.
- (12") (18" double jointed) double pantry lead-free faucet.
- Double pantry washdown hose with lead-free vacuum breaker.
- Double pantry washdown hose with 16" add-on lead-free faucet with vacuum breaker.
- Clean-up kit, includes draw-off brush, clean-up brush and paddle scrapper with 40" handle.
- Perforated stainless steel basket assembly (single – 20 gallon) (triple – 20 through 60 gallon).
Electric self-contained, stainless steel, 2⁄3 jacketed floor mounted stationary steam kettle. Ellipsoidal bottom kettle liner formed and fully welded type 316 and type 304 stainless steel exterior with (1⁄4 x 5⁄8 inch 20 gallons) (3⁄8 x 1 inch 40 gallons and greater) bar rim, embossed gallon/liter markings and faucet bracket. 50 psi (3.4 kg/cm2) steam jacket rating. Spring assist hinged stainless steel cover with condensate ring and drop down lift handle. Two inch compression tangent draw-off valve with perforated strainer. Tubular stainless steel legs with flanged feet. Stainless steel enclosure for “water resistant” controls. Controls include a power switch, power “on” light, solid state temperature control, vacuum/pressure gauge, pressure relief valve, low water light and low water shut-off. UL listed. UL Classified for sanitation in accordance with ANSI/NSF Standard #4. Meets ASME
Q & A
Videos
Vulcan K20EL Specifications
Installation Type | Floor Model |
---|---|
Kettle Jacket | Partial |
Type | Single Kettle |
Brand | Vulcan |
Made in | USA |
Certifications | cULus |
Power Type | Electric |
Base | Tri-leg |
Category | Kettle, Electric |
Capacity | 20 Gallon |
Heat | Electric |
Material | Stainless Steel |
Style | Stationary |
Width (in) | 32.5 |
Height (in) | 31.86 |
Depth (in) | 32 |
Weight | 196.00 |
Additional Information on Vulcan K20EL
Items Related to Vulcan K20EL
Commercial Steam Kettles 504 products