Traulsen RET232NUT-FHS 52.13'' 46 cu. ft. Top Mounted 2 Section Solid Door Reach-In Refrigerator

Standard Features:

The R-Series “N-Width” reach-in Even Thaw Refrigerator is designed especially to thaw frozen food product under safe, temperature-controlled conditions. It can be used to thaw both full or partial loads of frozen food product. This model includes such high-quality cabinet features as stainless steel exterior and interior construction, self-closing doors with a stay-open feature, and is equipped standard with a full complement of stainless steel tray slides to accommodate either: one (1) 18" x 26" or two (2) 14" x 18" pans per pair of tray slides. Traulsen's even thaws are solely intended for thawing, and not for use as holding cabinets.

• 9' Cord & Plug Attached
• Stainless Steel Breaker Caps
• Five-Year Compressor Warranty
• Stainless Steel Exterior & Interior
• Gasket-Protecting Metal Door Liner
• Exterior Mounted Dial Thermometer
• Guaranteed For Life Cam-Lift Hinges
• Three-Year Parts And Labor Warranty
• Magnetic Snap-In EZ-Clean Door Gasket(s)
• Automatic Non-Electric Condensate Evaporator
• Full or Half-Length Stainless Steel Doors With Locks
• Set Of Four (4) 6" High Adjustable Stainless Steel Legs
• Guaranteed For Life Horizontal Work Flow Door Handle
• Self-Closing Doors With Stay-Open Feature At 120 Degrees
• Twenty Eight (28) #1 Type Tray Slides 4" O.C. (14 per section)
• Special Refrigeration System/Air Flow Design Promotes Rapid, Safe Thawing Of Frozen Food Product

Options & Accessories:

• Re-Hinging Feature
• Plated Shelves To Fit Tray Slides
• 6" High Stainless Steel Kick Plate
• Decorative Kool Klad Laminate Decor
• EZ-Open Foot Pedal (full height doors only)
• Set of Four (4) 6" High Casters In Lieu of Legs
• 4-1/2" High Stainless Steel Base In Lieu of Legs
• Stainless Steel Finished Back With Rear Louvers
• Set of Four (4) 4-5/8" High Casters In Lieu of Legs

Specifications:
Construction, Hardware, and Insulation 

• Cabinet exterior, including front, one-piece sides, louver assembly, and doors are constructed of heavy gauge stainless steel. Cabinet interior and door liners are constructed of stainless steel. Exterior cabinet top, back, and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with a stay-open feature at 120 degrees. Guaranteed for life, work flow door handle is mounted horizontally over recess in door which limits protrusion from door face into aisleways. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Anti condensate heaters are located behind each door opening. Cabinet and door contain high density, non-CFC, foamed in place polyurethane insulation.

Refrigeration System 

• A top-mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one-piece louver assembly. It features a plenum effect blower coil, large, high humidity evaporator coil located outside the food zone, and a top-mounted non-electric condensate evaporator. Heaters and fans mounted in the mullion facilitate the Even-Thaw process. Standard operating temperature is 37 to 41°F. 

Interior 

• Standard interior arrangements include twenty eight (28) #1 tray slides 4" O.C., fourteen per section. Each pair of tray slides can accommodate either: (1) 18" x 26" or (2) 14" x 18" pans. 

Warranties 

• Both a three-year parts and labor warranty and a five-year compressor warranty (self-contained models only) are provided standard.