Power Soak SS-D-208-1 Silver Soak Sink
MPN#: SS-D-208-1
Free Freight?
Quick Ship
$10,224.76
Product Protection
Starting at
Power Soak SS-D-208-1 Specifications
Brand | Power Soak |
---|---|
Certifications | NSF |
Gauge | 14 Gauge |
Width (in) | 18.68 |
Height (in) | 26.40 |
Depth (in) | 18.68 |
Additional Information on Power Soak SS-D-208-1
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Power Soak SS-D-208-1 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Power Soak SS-D-208-1 Description
Silver Soak Sink, drop-in, 26.4" H, 11 gallon wash tank, 304 stainless steel, 14 gauge tank & rim, 3/4 HP, 208v/60/1-ph, NSF, ULSTANDARD SPECIFICATIONS
- Single drain included
- ¾ HP wash pump motor
- SST collar 18.68” square
- 11 gallon wash tank capacity
- SST removable drain screen
- Uses standard pre-soak chemical
- (2) stainless steel silverware baskets included
- Wash tank shall be 15.4” square with SST collar
- Silver Soak holds one silverware basket when operating
- Silverware basket holds approximately 250 pieces of silverware
- 304 stainless steel construction with 14 gauge tank, legs, and rim
- Wash pump to recirculate wash water at 600 gallons per minute flow rate
- System conforms to ANSI/NSF Standard 2 with all welds to be heliarc (TIG) welds
- Wash tank to be dropped into SST tabling using the SST collar to secure the tabling
- Will de-tarnish silver plate with proper pre-soak chemical and aluminum bar (bar by others)
- Wash tank temperature to maintain 114 degrees when filled with warm water and running with no wash tank heater
- PS-50 Single Pistol grip On/Off mechanical Start/Stop
- Meets UL 50, category 4X specifications
- Mounting bracket and mounting studs for control panel included. Enables easy mounting of control panel to wall, dish table or wash tank.
ELECTRICAL
- 208V/60/1, 4.8 Amps
- 230V/60/1. 5.2 Amps
PLUMBING
- ½” single handle faucet “hot only” included
- 1 ½” inside diameter ball valve drain provided
WARRANTY
- Three years parts and labor warranty
ORIGIN OF MANUFACTURE
- Designed and manufactured in the United States.
OPTIONAL ACCESSORIES
- Splash guard
- Additional silverware baskets
Power Soak SS-D-208-1 Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Power Soak SS-D-208-1
Mobile Soaking Sinks 32 products