Power Soak SKS-70L-208-3 Skewer Soak Dishtable

Description

Power Soak SKS-70L-208-3 Description

Skewer Soak Dishtable, left-to-right operation, 69-1/2"W with 42"W x 21"D (front to back) wash tank, (1) wash jet per 6 inches, 1" end splash, 13"W drainboard, 12"W sanitizer compartment, 1" end splash, 3/4" combination pre-rinse with add on faucet, (2) ball valve drains, 304 stainless steel construction, 7000 watt heater, includes skewer assembly for washing skewers, 208v/60/3-ph, UL, NSF

• 1’ end splash
• SST hinged wash tank cover
• Drains and faucets included, but optional
• All tanks and tabling, 14 gauge, 304 SST
• Dual liquid high & low water level sensors
• Chemical injection points pre-drilled at factory
• ¾” combination pre-rinse with high flow faucet
• PS-200 Series Control Package to be included
• Bottom of wash tank to be creased to facilitate draining
• Bottom of wash tank to be creased to facilitate draining
• SST wash pump impeller, pump housing and wash manifold
• SST wash pump housing fully self-draining with no use of drain line or valve
• 7000 watt wash tank heater. Maintain wash tank temperature at 123˚ +/- ½ ˚ F
• Perforated work tray to run full length of wash tank for rinsing of washed skewers
• System conforms to ANSI/NSF Standard 2 with all welds to be heliarc (TIG) welds
• SST wash pump intake to run full length of the rear of the wash tank below wash jets
• Available left to right or right to left operation - 34” front to back overall, 69.5” overall length
• 2 HP Wash Pump Motor (30-48” Tank) with SST impeller, pump housing and wash manifold
• Backsplash to be 9.5” overall height - 6” vertical with 45 degree angle to wall w/ 1 ½” turn up
• Wash tank shall be 28.75” I.D. front to back by 19” deep - 42”, left to right or right to left operation
• Sanitizer tank shall be 28.75” I.D. front to back by 19” deep - 13”, left to right or right to left operation
• Parallel Wash Flow with low profile wash jets spaced every 6” flush along the back wall of wash tank & above the wash pump intake
• Removable rotating skewer carousel with clips to hold skewers in place during washing. Standard skewer carousel holds 16 skewers.
• Controls includes at minimum:
  • Meets UL 50, category 4X specifications
  • Operator controls - Green (ON) / Red (OFF) buttons
  • Automatically monitors and regulates the wash water temp
  • Low voltage power is supplied to all operator controls and sensors
  • Monitors high and low liquid levels in both the wash tank and sanitizer tank

• PS-200 - Wash tank heat monitoring and sanitizer tank monitoring

• Three year parts and three year labor warranty from the date of shipping (USA only)

• Designed and manufactured in the United States.

• Over shelfs
• 1” end splash
• Welded leg sets
• Filled end splash
• Welded field joint
• Channel end splash
• Hemmed end splash
• Turned up back splash
• Backsplash end splash
• Back splash extensions
• Mechanical filed joint (JBZ)
• Automatic chemical dispenser
• Turned down back splash with “z” clips

Close Description