Pitco SG14RS-4FD Solstice Prepackaged (4) 50 lb. Full Tanks Gas Floor Fryer with Millivolt Thermostatic Controls and Solstice Filter Drawer System, 115 Volts - 488,000 BTU
Pitco SG14RS-4FD Specifications
BTU | 488,000 BTU |
---|---|
Control Type | Millivolt Thermostatic |
Filtration System | Solstice Filter Drawer System |
Series | Solstice Prepackaged |
Cabinet | Stainless Steel |
Brand | Pitco Frialator |
Certifications | CE |
Capacity | (4) 50 lb. Full Tanks |
Voltage | 115 Volts |
Weight | 980.00 |
Additional Information on Pitco SG14RS-4FD
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Pitco SG14RS-4FD Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Pitco SG14RS-4FD Description
If your kitchen does a lot of deep frying and you need a reliable 4-fryer system that’s easy to use and comes with a filtration system the SG14RS-4FD Solstice Prepackaged Floor Model Gas Fryer System is the obvious choice. Each fryer has a 14” x 14” extra-smooth peened stainless steel fry tank that holds between 40 and 50 lbs of oil. In total this 4-fryer system generates 488,000 BTU/hr.
The frying oil in each fryer can be set between 200ºF and 400ºF with a simple millivolt thermostat. For additional functionality, each fryer can be configured with either a Solid State T-Stat or the Intellifry I12 computer. With the optional Intellifry 12 or Solid State T-Stat users have access to automated timers, control for an optional basket lift, melt cycle, and boil out mode. To keep everyone in the kitchen safe this fryer has a high-temperature safety switch and a drain valve interlock.
This fryer is equipped with the Solstice Filter Drawer System to reduce operational costs by extending the amount of time oil can be used. This can reduce downtime since oil doesn’t need to be replaced as often. The filtration system features a stainless steel drawer drain tank that tucks away at the bottom of one of the Commercial Deep Fryers. Wheels at the rear of the drawer make it simple to move. Oil is quickly filtered at a rate of 8 GPM by a ⅓ HP filter pump making it possible to run a filtration cycle quickly.
This fryer features stainless steel construction for its front, sides, door, and tank making it easy to clean and maintain. Pitco’s patented Solstice Burner Technology dependably heats oil without a blower. This atmospheric heating system provides fast recovery times without additional components that can break down giving you peace of mind that the fryer will run at peak performance.
Standard Features:
- Standard Combinations
- Any combination of models SG14, SG14R, SG14T, SG18 and BNB are available. Refer to fryer specification sheets for options and other technical information. Additional filters may be needed for larger systems.
- NOTE: Up to 6 models per filter. Standard filter location is on the left. Many other combinations are available. Call your dealer/distributor for more details.
- Construction
- 1/3 HP heavy duty motor and pump assembly.
- Large filter media area for filtering heavily breaded products.
- Filter pan guide assembly are constructed of polished stainless steel.
- Special design pan stabilizer legs allow for ease of movement over rubber mats.
- Welded heavy-duty stainless steel filter pan mounted on two rigid casters for easy pan alignment and removal.
- Operations
- Simple two-step operation:
- 1. Blue handle valve is opened to drain oil into filter pan.
- 2. Red handle valve is opened to return oil from filter to fryer.
- Filter pan lid attaches to cabinet for ease of use.
- Filter system can handle longer oil polishing duty cycles.
- High flow pump and large return lines produce faster oil refill times.
- Self-aligning filter piping makes it easy to assemble and disassemble.
- Larger 3” (7.6 cm) drain line allows for faster draining without clogging.
- Large filter media collects more debris, which extends time between changes.
- All filter assembly parts are self-integrated. There are no loose parts to be misplaced.
- Large curved down spout drain virtually eliminates splashing and swivels for oil disposal.
- Light-weight, removable filter pickup assembly, with built-in handle, for fast media cleaning under busy conditions.
- Simple two-step operation:
- Approvals
- NSF Listed
- CE Certified
- MEA Approved
- CSA Certified (AGA, CGA)
- Australian Gas Assoc. Certified (AuGA)
- Fryer scoop
- Filter scoop
- Cleaning brush
- Filter powder and fryer cleaner sample packets
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm) sample packet - 25 sheets
- Flush hose
- Fryer brush
- Filter scoop
- Filter powder
- Filter heater for solid shortening
- Paperless stainless steel mesh filter
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm); 100 sheets per package
Pitco SG14RS-4FD Accessories
Pitco SG14RS-4FD Reviews
There are no reviews yet for this product.