Pitco SG14RS-3FD Solstice Prepackaged (3) 50 lb. Full Tanks Gas Floor Fryer with Solid State Controls and Solstice Filter Drawer System, 115 Volts - 366,000 BTU
Pitco SG14RS-3FD Specifications
BTU | 366,000 BTU |
---|---|
Control Type | Solid State |
Filtration System | Solstice Filter Drawer System |
Series | Solstice Prepackaged |
Cabinet | Stainless Steel |
Brand | Pitco Frialator |
Certifications | CE |
Capacity | (3) 50 lb. Full Tanks |
Voltage | 115 Volts |
Weight | 785.00 |
Additional Information on Pitco SG14RS-3FD
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Pitco SG14RS-3FD Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Pitco SG14RS-3FD Description
If your commercial kitchen needs a simple to use triple Floor Model Gas Fryer setup that you can rely on every day look no further than the SG14RS-3FD Solstice Prepackaged Fryer System. Each of these gas Commercial Deep Fryers has a 14” x 14” fry pot that can hold 40-50 lbs of oil and has a total output of 366,000 BTU/hr.
Each fryer is controlled with a simple millivolt thermostat with a thermo-safety pilot. To keep everyone in the kitchen safe, a high-temperature safety switch will immediately shut the unit off when it reaches a dangerous temperature.
Pitco’s patented Solstice Burner Technology quickly heats oil in these fryers without a blower. Since there are fewer moving parts there are fewer things to go wrong allowing this unit to have unmatched reliability. Beneath the tube racks are cool zones for debris to sink into. This prevents carbonization and will allow the frying oil to be used for longer between filtrations.
The simple to use two-step filtration system on these fryers reduce operational costs by extending the amount of time oil can be used. This also adds to the convenience and reduced downtime since oil does not need to be swapped out as often. The filtration system features a stainless steel drawer drain tank that tucks away under one of the fryers. Wheels at the rear of the drawer make it simple to move. Oil is quickly filtered with a ⅓ HP filter pump that forced oil through an 18-½” x 20-½” filter paper envelope at a rate of 8 GPM.
The sides, doors, tanks, and fronts of these fryers are made from durable stainless steel that will last for years.
Standard Features:
- Standard Combinations
- Any combination of models SG14, SG14R, SG14T, SG18 and BNB are available. Refer to fryer specification sheets for options and other technical information. Additional filters may be needed for larger systems.
- NOTE: Up to 6 models per filter. Standard filter location is on the left. Many other combinations are available. Call your dealer/distributor for more details.
- Construction
- 1/3 HP heavy duty motor and pump assembly.
- Large filter media area for filtering heavily breaded products.
- Filter pan guide assembly are constructed of polished stainless steel.
- Special design pan stabilizer legs allow for ease of movement over rubber mats.
- Welded heavy-duty stainless steel filter pan mounted on two rigid casters for easy pan alignment and removal.
- Operations
- Simple two-step operation:
- 1. Blue handle valve is opened to drain oil into filter pan.
- 2. Red handle valve is opened to return oil from filter to fryer.
- Filter pan lid attaches to cabinet for ease of use.
- Filter system can handle longer oil polishing duty cycles.
- High flow pump and large return lines produce faster oil refill times.
- Self-aligning filter piping makes it easy to assemble and disassemble.
- Larger 3” (7.6 cm) drain line allows for faster draining without clogging.
- Large filter media collects more debris, which extends time between changes.
- All filter assembly parts are self-integrated. There are no loose parts to be misplaced.
- Large curved down spout drain virtually eliminates splashing and swivels for oil disposal.
- Light-weight, removable filter pickup assembly, with built-in handle, for fast media cleaning under busy conditions.
- Simple two-step operation:
- Approvals
- NSF Listed
- CE Certified
- MEA Approved
- CSA Certified (AGA, CGA)
- Australian Gas Assoc. Certified (AuGA)
- Fryer scoop
- Filter scoop
- Cleaning brush
- Filter powder and fryer cleaner sample packets
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm) sample packet - 25 sheets
- Flush hose
- Fryer brush
- Filter scoop
- Filter powder
- Filter heater for solid shortening
- Paperless stainless steel mesh filter
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm); 100 sheets per package
Pitco SG14RS-3FD Accessories
Pitco SG14RS-3FD Reviews
There are no reviews yet for this product.