Pitco SG14RS-2FD Solstice Prepackaged (2) 50 lb. Full Tanks Gas Floor Fryer with Solid State Controls and Solstice Filter Drawer System, 115 Volts - 244,000 BTU
Pitco SG14RS-2FD Specifications
BTU | 244,000 BTU |
---|---|
Control Type | Solid State |
Filtration System | Solstice Filter Drawer System |
Series | Solstice Prepackaged |
Cabinet | Stainless Steel |
Brand | Pitco Frialator |
Certifications | CE |
Capacity | (2) 50 lb. Full Tanks |
Voltage | 115 Volts |
Weight | 550.00 |
Additional Information on Pitco SG14RS-2FD
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Pitco SG14RS-2FD Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Pitco SG14RS-2FD Description
For establishments that need a reliable Floor Model Gas Fryer with oil filtration designed for heavily breaded items, the Frialator SG14RS-2FD Solstice Prepackaged Fryer System from Pitco is at the top of the list. These two Commercial Deep Fryers each have a 14” x 14” fry pot that can hold 40-50 lbs of oil.
For ease of use, this fryer comes with a simple millivolt thermostat. Everyone in the kitchen is kept safe with a high-temperature safety switch that will immediately turn off the unit when it reaches a dangerous temperature.
To quickly and efficiently heat oil this fryer uses Pitco’s patented Solstice Burner Technology. Without using blowers or ceramics, these burners are extremely reliable since there are fewer mechanical parts that can fail. Beneath the tube rack is a cool zone for debris to sink into. Debris will not be carbonized and will allow the frying oil to be used for longer without affecting the flavor of food.
This fryer is equipped with a two-step filtration system to reduce operational costs by extending the amount of time oil can be used. It also adds to convenience since it will need to be emptied out much less. The filtration system features a stainless steel drawer drain tank that tucks away at the bottom of the unit. Wheels at the rear of the drawer make it simple to move. Oil is quickly filtered with an 8 GPM filter pump that forces oil through an 18-½” x 20-½” filter paper envelope
When it comes time to change the oil in the fry tank, this fryer has a 1-¼” full port drain valve that makes draining quick. A drain extension, drain line clean out rod, and a sample packet of fryer cleaner are included to make cleaning as easy as possible.
The sides, door, tank, and front of this fryer are made from stainless steel to stand up to the daily rigors of a commercial kitchen. Each fryer in this setup produces 122,000 BTU/hr for 244,000 BTU/hr in total.
Standard Features:
- Standard Combinations
- Any combination of models SG14, SG14R, SG14T, SG18 and BNB are available. Refer to fryer specification sheets for options and other technical information. Additional filters may be needed for larger systems.
- NOTE: Up to 6 models per filter. Standard filter location is on the left. Many other combinations are available. Call your dealer/distributor for more details.
- Construction
- 1/3 HP heavy duty motor and pump assembly.
- Large filter media area for filtering heavily breaded products.
- Filter pan guide assembly are constructed of polished stainless steel.
- Special design pan stabilizer legs allow for ease of movement over rubber mats.
- Welded heavy-duty stainless steel filter pan mounted on two rigid casters for easy pan alignment and removal.
- Operations
- Simple two-step operation:
- 1. Blue handle valve is opened to drain oil into filter pan.
- 2. Red handle valve is opened to return oil from filter to fryer.
- Filter pan lid attaches to cabinet for ease of use.
- Filter system can handle longer oil polishing duty cycles.
- High flow pump and large return lines produce faster oil refill times.
- Self-aligning filter piping makes it easy to assemble and disassemble.
- Larger 3” (7.6 cm) drain line allows for faster draining without clogging.
- Large filter media collects more debris, which extends time between changes.
- All filter assembly parts are self-integrated. There are no loose parts to be misplaced.
- Large curved down spout drain virtually eliminates splashing and swivels for oil disposal.
- Light-weight, removable filter pickup assembly, with built-in handle, for fast media cleaning under busy conditions.
- Simple two-step operation:
- Approvals
- NSF Listed
- CE Certified
- MEA Approved
- CSA Certified (AGA, CGA)
- Australian Gas Assoc. Certified (AuGA)
- Fryer scoop
- Filter scoop
- Cleaning brush
- Filter powder and fryer cleaner sample packets
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm) sample packet - 25 sheets
- Flush hose
- Fryer brush
- Filter scoop
- Filter powder
- Filter heater for solid shortening
- Paperless stainless steel mesh filter
- Filter paper envelope 18-1/2” x 20-1/2” (47 cm x 57 cm); 100 sheets per package
Pitco SG14RS-2FD Accessories
Pitco SG14RS-2FD Reviews
There are no reviews yet for this product.