1 (800) 555-0666

Pitco FBG24 Flat Bottom 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 120,000 BTU

MPN#: FBG24
Free Freight?
Quick Ship
$14,156.00
or enjoy small payments $304.21/mo.
Lease Payment Calculate
Product Protection
Product Protection
Starting at
Reward Points
Reward Points
You will earn 16322

Pitco FBG24 Specifications

Total BTU120,000 BTU
SeriesFlat Bottom
Installation TypeFloor Model
ConstructionStainless Steel
Burner StyleTube
BrandPitco Frialator
CertificationsCE
BTU120,000 BTU
Power TypeGas
Control TypeThermostatic
ControlsSolid State
Capacity51 - 90 lb.
HeatNatural or Propane Gas
Weight423.00

Additional Information on Pitco FBG24

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Pitco FBG24 Certifications

CE

CE

The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

Pitco FBG24 Description

Flat Bottom Fryer, gas, floor model, 57-87 lb. oil capacity, 24"x24" frying area, solid state controls, auto melt cycle, boil out mode, matchless ignition, marine front edge, mild steel tank, stainless steel front, sides & splash-back, 120,000 BTU, CSA Flame, CSA Star, NSF, CE (available mix/match and with FD-M filter drawer filtration system)

If you’re looking to fry up donuts, funnel cakes, and other batter-based goods the gas-powered Frialator FBG24 Flat Bottom Fryer from Ptico should be at the top of your list for its purpose-built design. This Floor Model Gas Fryer features a single 24” x 24” fry tank with a total oil capacity of 57 to 87 lbs.

The simple to use solid-state T-stat safely maintains the temperature and includes boil out mode and melt cycle. Alternatively, if you need a more advanced control system a digital thermostat with a countdown timer is available.

To make frying battered goods ideal, the flat bottomed fry tank is made from heavy-gauge mild steel to prevent sticking. The welded tank features a smooth peened finish making it easy to clean to reduce downtime. Stainless steel is used for the construction of the front, side, backsplash, and door providing easy to maintain surfaces that will continue to look good for the life of the fryer.

This fryer has a gas input rate of 100,000 BTU/hr and uses blower free burner technology. Since this fryer does not rely on a burner to generate heat there are fewer mechanical parts that can fail over time making it extremely reliable. The gas control valve stops gas from flowing into the main burner until the pilot lit. To keep everyone in the kitchen safe, a temperature limit switch will automatically switch the unit off if it reaches dangerous temperatures.

A 1/14” full port drain valve, drain extension, and drain line clean out rod make it quick and easy to remove oil. A drain plug and a free sample of fryer cleaner are also included with the fryer.

Pitco FBG24 Flat Bottom 57-87 lb. Stainless Steel Gas Floor Model Full Pot Fryer with Solid State Controls - 120,000 BTU

Flat Bottom Fryer, gas, floor model, 57-87 lb. oil capacity, 24"x24" frying area, solid state controls, auto melt cycle, boil out mode, matchless ignition, marine front edge, mild steel tank, stainless steel front, sides & splash-back, 120,000 BTU, CSA, NSF, CE (available mix/match and with FD-M filter drawer filtration system)

Standard Features & Accessories:
  • Drain plug
  • Cleaning brush
  • 9” (22.9 cm) Legs
  • Filter scoop shovel
  • Drain Line Clean out rod
  • Removable flue splash guard 
  • Built-in integrated flue deflector
  • Blower Free Burner Technology
  • 1 ¼” (3.2 cm) Full port drain valve
  • Tank - heavy duty gauge mild steel
  • Filter powder and fryer cleaner sample packets
  • Cabinet-stainless steel front, door, sides & splash back.
  • Manual gas shutoffs and Rear gas manifold connection
  • Filter paper envelope 18-1/2” x 20-1/2” (47 x 57cm) sample starter packet
  • Solid State Temperature Controller with matchless ignition, melt cycle, and drain valve interlock switch.
Options & Accessories: (Additional Cost)
  • Tank cover
  • Flush hose
  • Stainless Steel back
  • Perforated pan divider
  • Crumb Tray - rear mount
  • Filter heater for solid shortening 
  • Flexible gas hose with disconnect
  • Paperless stainless steel mesh filter
  • Digital Thermostat with countdown timer
  • 9” (22.9 cm) swivel adjustable rear and front casters
Construction
  • Heavy duty 3/16” (.48 cm) door hinges
  • Marine front edge to hold wet batter trays
  • Front 1 ¼” (3.2 cm) full port drain for quick draining.
  • Stainless steel cabinet front, door, side and splash back
  • 9” (22.9 cm) bottom clearance allows for ease of cleaning.
  • Welded tank with an extra smooth peened finish ensures easy cleaning.
  • Fry tank constructed of heavy gauge mild steel for stickless wet batter frying.
Controls
  • Temperature limit switch safely shuts off all gas flow if the fryer temperature exceeds the upper limit.
  • Integrated gas control valve acts as a manual valve, pilot valve, main valve, gas filter and pressure regulator.
  • Blower Free Burner Technology provides dependable heat transfer without the need for complex power blowers.
  • Drain valve interlock switch is hermetically sealed switch that automatically shuts down the heating system if the drain valve is opened.
  • Gas control valve prevents gas flow to the main burner until pilot is established and shuts off all gas flow automatically if the pilot flame goes out.
  • Solid State Thermostat mounted behind the front door. A compact temperature controller incorporating automatic melt cycle, system indicator lights and power switch.
  • Matchless ignition ignites a standing pilot once a day when the power is turned on. Less wear and tear on components and faster recovery when the controller calls for heat. 
Filter System
  • Battery up to 5 Flat Bottom Commercial Deep Fryers per filter. 
  • Filter pump thermally and overload protected
  • Connection to fryer is self-aligning for ease of use.
  • Filter pan lid stows in the cabinet and out of the way.
  • High flow pump and large return lines produce faster oil refill times.
  • Easy two step filtering: Red handle to drain tank and Yellow Handle to return oil.
  • Filter pan is stainless steel with rear wheels for easy movement during cleaning.
  • Extra Large 3” (7.6 cm) curved drain spout virtually eliminates splashing and swivels for oil disposal.

Options for Pitco FBG24

Built-in filtration system
Startup program
Factory note on export units
Controls
Splashguard
Gas type
Voltage (Fryer)
Accessories
Mounting options
What is included
  • Frypot Warranty: 4 years parts only frypot warranty from the date of manufacture, standard

Pitco FBG24 Parts

All Pitco FBG24 Parts

Pitco FBG24 Reviews

There are no reviews yet for this product.

Questions and Answers

Items Related to Pitco FBG24

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Pitco FBG24 Flat Bottom 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 120,000 BTU
FBG24 Flat Bottom 51 - 90 lb. Gas Floor Model Full Pot Fryer with Solid State Controls - 120,000 BTU
$16,321.80 $16,321.80 $14,156.00