Metro 12WB3C Regular Erecta® Wall Mount

Metro 12WB3C Description

Regular Erecta® Wall Mount, 12"D x 20-13/16"H, (1) to (3) shelves capacity (each mount consists of (2) shelf supports & mounting brackets) (wall bolts or screws not included), chrome plated finish, NSFRegular Erecta® Wall Mount, 12"D x 20-13/16"H, (1) to (3) shelves capacity (each mount consists of (2) shelf supports & mounting brackets) (wall bolts or screws not included), chrome plated finish, NSF

• 1" Shelf Ledges: To prevent items from protruding or falling off shelves, ledges can be installed on the shelf edges.
• Foot Plate: Replaces the leveling bolt. Used when units are to be bolted to the floor or, without bolts, when a broader foot is desired.
• Wall Kit: Kit includes two shelves, shelf supports, and mounting brackets. Wall bolts and screws not included; they must be selected according to type of wall.
• Upright Clamp: Where regular Erecta Shelf® units are to be joined end-to-end, the upright clamp holds the adjacent uprights securely so that each unit buttresses the other.
• Rods & Tabs: Rods hook over wires of top shelf and are attached to each of the other shelves with spring-clip tab. Each rod requires one tab for each shelf except top self. Chrome.
• Shelf Spacers: Where shelves are wanted at spacing other than 5" (127mm) increments, shelf spacers wedge into the upright channels to provide a solid support at the desired level. Spacers are used at outside corners, four per shelf.
• 8" (203mm) Shelf Dividers: Shelf dividers enable you to compartmentalize shelves, help keep shelf contents orderly. Because they snap into place, they can be positioned and repositioned to exact size of section needed. All models 8" (203mm) high.
• Corner Brace: When regular Erecta Shelf® units are to be joined at right angles, corner braces link shelf ends of one unit to shelf sides of the other, eliminating one upright and leaving the shelving corner open and fully usable. Two required per shelf.
• Wall Mounts: Used to create wall-mounted shelving units with 12" or 18" (305 or 460mm) regular Erecta Shelf® shelves of any length. Models are available to accommodate from one to five shelves. Each mount consists of shelf support and mounting brackets. Wall bolts or screws not included; they must be selected according to type of wall. Order shelves from sheet #10.50.