Lakeside Manufacturing 5710 Elite Series" Tray Truck

Standard Features:

• Space saving narrow design.
• Doors open 270° for unobstructed access.
• Compartment floor drain facilitates interior cleaning.
• Base corner bumpers protect walls, furnishings and doors.
• Easy-grip recessed handles on both ends for increased maneurability.
• Accommodates 10 or 20 each, 14” x 18” or 15” x 20” size trays, one per ledge.
• Cart body and removable stainless steel ledge panels are easily cleaned and sanitized.
• Paddle latch door catch assures positive door closure and convenient one-hand opening.

Optional Accessories:

• 8” Casters 
• Towing Hitch
• Menu Card Holder 
• Transport Door Latch 
• Full Perimeter Bumper
• Custom Ledge Spacing 
• Center Mount Fixed Casters
• End Mount Recessed Push Handles
• Creased Compartment Floor (for drain)

Specifications:
Unit shall be of Type 304 stainless steel welded and riveted construction to accommodate 14” x 18” (356 x 457 mm) or 15” x 20” (381 x 508 mm) trays. Material thickness shall be 16 gauge for top and floor/base, 20 gauge for sides and back. Door(s) shall be of 20 gauge insulated double-pan design, and shall be mounted to unit frame with two each 3" (76 mm) heavy-duty stainless steel hinges. Hinges shall be welded to door(s) and unit frame. Door(s) shall swing 270° to provide full access to tray compartments, and shall be easily removable by lifting off of hinges. Door latches shall be recessed paddle design. Tray ledges shall be of 18 gauge stainless steel angle, welded to a 18 gauge stainless frame panel at 5” (127 mm) spacing. Ledge panels shall be designed to accommodate 14” x 18” or 15” x 20” trays, and shall be removable for easy cleaning. Tray compartment(s) shall have vents on end panels and shall have perforated floor center drain(s). Unit shall feature 1 1/4" (32 mm) thick extruded PVC rounded bumpers mounted to corners of unit base, and recessed vertical handles on sides at both ends of unit. Four each casters shall be extra-load plate type, two fixed and two swivel, mounted to a 14 gauge stainless steel dolly on unit base. Swivel casters shall feature shielded ball bearing races and zerk fittings for lubrication of swivel bearings. Caster wheels shall be 6” (152 mm) diameter with 2” wide rounded tread of non-marking cushion material. Two casters shall have brake. Unit shall be NSF listed.