Hatco FR-9-208-1-QS (QUICK SHIP MODEL) Food Rethermalizer/Bain Marie Heater
MPN#: FR-9-208-1-QS
Free Freight?
Quick Ship
$1,746.80 /
Calculate
Product Protection
Starting at
Hatco FR-9-208-1-QS Specifications
| Brand | Hatco |
|---|---|
| Made in | USA |
| Certifications | CE |
| Controls | Unit |
| Heat | Electric |
| Temperature Range | 140 - 190 Degrees F |
| Voltage | 208 Volts |
| Wattage | 9.0 Kilowatts |
| Width (in) | 6.75 |
| Height (in) | 12.25 |
| Depth (in) | 16.88 |
| Weight | 27.00 |
Additional Information on Hatco FR-9-208-1-QS
pickupto-gosolutions.pdf 
catalogbrochure.pdf 
ownersmanual.pdf 
hatco-fr-9-208-1-qs.specsheet.pdf 
parts-list.pdf 
quick-ship.pdf 
hatco-fr-9-208-1-qs.specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Hatco FR-9-208-1-QS Certifications
CE
The product complies with the essential requirements of the relevant European health, safety and environmental protection legislations.
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
Hatco FR-9-208-1-QS Description
(QUICK SHIP MODEL) Food Rethermalizer/Bain Marie Heater, Electric, stainless steel front, silver-gray hammertone body, black base, 9kW, 208v/60/1, NSF, UL, UL EPH Classified, CSA, CE, Made in USA(QUICK SHIP MODEL) Food Rethermalizer/Bain Marie Heater, Electric, stainless steel front, silver gray hammertone body, black base, 9 kW, 208v/60/1, NSF, UL, UL EPH Classified, ANSI/NSF 4, CSA, Made in USAStandard Features:
The Hatco FR is designed to be used with a Bain-Marie or food reconstitutor, to heat or hold foods at safe temperatures between 140°F and 190°F (60°-88°C).
FLEXIBILITY
- The FR mounts easily to the underside of a holding vessel, leaving the entire vessel area free. Water is continually circulated to avoid any “cool”spots.
- The unit controls water temperature from 140°F (60°C) to 190°F (88°C). The Hatco FR is shipped factory assembled, pre-wired, and includes standard 2" (51 mm) plated brass plumbing fittings for mounting into a holding tank. A full-size template is supplied to properly locate fitting holes.
QUALITY
- The following features assure the finest performance for years to come:
- FR models feature a stainless steel tank with a five-year limited warranty.
- The Hatco FR has separate sump and heating compartment drains for cleaning and sanitizing.
- An optional low-water cut-off is available to prevent element burn-out due to a low water condition.
- Every Hatco FR is equipped with an ECO (Energy Cut-Off ) wired into the electrical circuit. This built-in protection “breaks”the power to the elements if the temperature of the water goes above the normal thermostat setting.
Options: (Not for Retrofit)
- Security Package
- Low-Water Cut-Off
- Wiring to CSA Specifications
- Stainless Steel Body and Base
- 4' (1219 mm) Cord with Plug (NEMA 6-20P) and Receptacle (NEMA 6-20R) (FR-3 only)
- 4' (1219 mm) Cord with Plug (NEMA 6-30P) and Receptacle (NEMA 6-30R) (FR-4 only)
Accessories:
- Flush Hose Kit
FOOD RETHERMALIZING REQUIREMENT
NSF Standard 4 has added performance requirements for food rethermalizing. The requirements mirror the requirements for food rethermalizing in the FDA Food Code. The basic requirement is that food reaches a temperature of 165°F (74°C) in a time period of two hours or less. Appliances that are manufactured for the purpose of rethermalizing food will need to meet these performance requirements in order to be listed to NSF Standard 4. Hatco sells a heating unit specifically made to be used for food rethermalizing, however, the heating unit is designed to be incorporated into a hot water bath rethermalizer. Hatco does not supply the vessel that contains the water, nor the system which determines how food is placed and held in the vessel. The Hatco FR unit simply attaches to the bottom of the vessel and supplies hot water to the vessel. Hatco does supply sizing recommendations to enable the appliance manufacturer to correctly size the FR unit to the vessel. However, there are variables in the way that the vessel is manufactured that affect its ability to pass the NSF performance requirements. The Hatco FR unit is listed with NSF for construction only. Due to the fact that the FR is only a portion of a larger system, it is impossible to do performance testing until the FR unit is incorporated onto the water vessel. The result is that it is the responsibility of the vessel manufacturer to have the entire rethermalizing appliance tested and listed in accordance with NSF Standard 4. Simply hanging an NSF listed FR unit on the appliance does not transfer NSF listing to the entire appliance.
Hatco FR-9-208-1-QS Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Hatco FR-9-208-1-QS
Food Rethermalizers / Bain Marie Heaters 23 products
