Groen 153119 PureSteem™ Water Treatment System

Description

Groen 153119 Description

PureSteem™ Water Treatment System, removes scale, chlorine & sediment, (for autofill units only) (Note: One system required per cavity)

• System is consist of a mounting bracket with a single cartridge head and integrated manifold and water shutoff valve. Manifold head shall be designed for quick and easy cartridge replacement.

• System is employ a single replaceable cartridge that locks into the matching manifold head. The Cartridge is a modified-molded block carbon type filter designed to remove silt, sediment and other suspended particles down to 0.5 micron (nominal) in size; and to reduce corrosive chlorine from inlet water for a capacity of 22,000 gallons. The Cartridge shall utilize IsoNet® (patented) scale and corrosion inhibitor technology to inhibit the formation and accumulation of scale (lime-scale) and to help protect against corrosion.

• The Cartridge should be replaced every six months, when capacity is reached or when effluent pressure or flow becomes inadequate. Cartridges must be replaced on a routine basis. The cartridge label includes a space for writing in the cartridge installation date, the initials of the service technician, and the “next replacement due” date. Long-term protection against costly water-related problems depends upon replacing the filter cartridge on a timely basis.

• Install by connecting a suitable water line to the 3/8” FPT inlet of the full-flow ball valve on the inlet of the Treatment System. NOTE: All current production Combo, HyPerSteam and HyPlus models are shipped with dual incoming water connection fittings. One connection is for incoming treated steam generator/boiler makeup water.

• It is recommended that the PureSteem System be installed near the unit (combo/steamer etc.) to facilitate simple routine filter cartridge replacement. The system should not be installed in a location where there is excessive heat or where it could be damaged by moving equipment.

• Replacement Cartridge [Part No. 153120]

• Treatment system and replaceable cartridge shall be made in the United States.

Close Description