Glastender DI-IS24 Ice & Water Unit
Glastender DI-IS24 Specifications
Construction | Stainless and Galvanized Steel |
---|---|
Brand | Glastender |
Certifications | ETL |
Width (in) | 24 |
Height (in) | 20.75 |
Depth (in) | 19 |
Weight | 55.00 |
Additional Information on Glastender DI-IS24
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Glastender DI-IS24 Certifications
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
Glastender DI-IS24 Description
The Glastender DI-IS24 Ice & Water Unit conveniently includes a hot and cold water faucet with an ice bin in a drop-in form factor.
This unit includes a deck-mounted hot and cold water gooseneck faucet that uses ⅜” sink leads. The sink basin is 6” deep, 11-½” front-to-back, and 9-¼” wide.
33 lbs of ice is held in a 10-½” deep ice bin. The ice bin features CFC-free foamed-in-place insulation to keep ice solid for as long as possible. A PVC breaker strip offers more insulation by sealing the gap between the sliding cover and the main liner, it also allows the sliding cover to glide effortlessly for easy access to the ice.
The sink basin, top, and sliding cover are made from 20 gauge stainless steel while the faucet support bracket is made from thicker 16 gauge galvanized steel. The bottom and exterior wrap are made from 22 gauge galvanized steel.
Installation requires a 22-½” wide and 17-½” front-to-back cutout in your counter and the unit easily drops in.
The Glastender DI-IS24 Ice & Water Unit is ETL-Sanitation certified and the faucet is NSF/ANSI 61, Annex G compliant.
Standard Features:
- 10-1/2″ deep liner
- Sliding stainless steel cover
- Heavy-duty faucet is standard
- Galvanized steel exterior wrap
- Includes 1-1/2″ IPS drain fitting
- CFC Free foamed-in-place insulation
- 9-1/4″ by 11-1/2″ by 6″ deep sink bowl
- Stainless steel top, interior liner and sink bowl
- All faucets are NSF/ANSI 61, Annex G low lead compliant
- Unique hemmed edge for added strength and visual appeal
- Includes four 1/4-20 x 1-1/2″ studs for mounting to countertop
- Manufactured with total welded construction to meet all NSF® standards
- PVC plastic breaker strip around ice bin liner: creates 5/16″ raised edge around liner, acts as thermal barrier to prevent heat transfer, and makes the cover slide easier
Glastender DI-IS24 Accessories
Glastender DI-IS24 Reviews
There are no reviews yet for this product.