Glastender BSA-18-RF Underbar Blender Station - 18"W x 24"D

Blender Station with Rinser Faucet, 18”W x 24”D, includes sink with lift-out perforated plastic wet waste strainer, splash mount hot & cold water faucet, push-down rinser faucet with 6” diameter pusher plate, 9” deep blender shelf, power cord hole with grommet in front skirt, junction box for duplex outlet mounted underneath blender shelf (outlet not included), stainless steel construction, low lead compliant, ETL-Sanitation (NOTE: Made to order, not returnable)

The Glastender BSA-18-RF Underbar Blender Station with Rinser Faucet provides an ideal platform for handling your bar’s frozen drink needs.

A hot and cold water faucet is mounted to the backsplash which is essential for any general washing. The ⅜” sink leads are easily accessible for inspection or maintenance by removing four screws. The 6” deep, 9-¼” wide, and 11-½” front-to-back sink basin includes a lift-out perforated plastic strainer for easily removing solid waste. The sink uses a 1-½” I.P.S. threaded drain.

Next to the sink basin is a push-down rinser specifically designed to fit blender cups. The rinser is easy to use and prevents any taste mixing from one drink to the next.

The blender shelf at the front of the unit is positioned low enough to keep the blender out of the way of the sink. The 9” front-to-back shelf is specifically designed for use with blenders and features CFC-free foamed-in-place insulation to dampen vibrations and noise from the operation of the blender. A grommeted hole in the front skirt allows for easy routing of the blender’s power cord. Underneath the blender shelf, a junction box provides a place to install a duplex GFI outlet (duplex GFI outlet not included). For simplified cleaning, the blender shelf features radiused corners.

Durable 20 gauge stainless steel makes up the entire unit except for the 16” legs which are made from tougher 16 gauge stainless steel. The unit is easy to keep level with height adjustable bullet feet. The overall dimensions of this blender station are 37” in height (including backsplash), 24” front-to-back, and 18” in width. This unit fits perfectly with other Glastender equipment.

The Glastender BSA-18-RF Blender Station with Rinser Faucet is ETL-Sanitation certified and both faucets meet NSF/ANSI 61, Annex G standards.

Standard Features:

• Blender Station with Rinser Faucet
• 18” W x 24” D
• 9” deep blender shelf
• Stainless steel construction
• Low lead compliant, ETL-Sanitation
• Power cord hole with grommet in front skirt
• Push-down rinser faucet with 6” diameter pusher plate
• Junction box for duplex outlet mounted underneath blender shelf (outlet not included)
• Includes sink with lift-out perforated plastic wet waste strainer, backsplash mount hot & cold water faucet