Glastender BLC-1/3-2 Beer Line Chiller with Remote Installable Control

Glastender BLC-1/3-2 Description

Beer Line Chiller with Remote Installable Control Panel, air-cooled, 27"W x 25-5/8"D x 16"H, (2) 100 gph circulating pumps, 125 feet maximum run to taps, digital temperature control with LCD display (includes mounting bracket for remote installation), (1) gallon capacity insulated stainless steel glycol bath with clear cover, heat exchanger housed in condensing unit, glycol filling port located on front, black vinyl exterior with galvanized steel base, R134a, 1/3 HP compressor, cETLus

The Glastender BLC-1/3-2 Beer Line Chiller with Remote Installable Control has dual circulation pumps for chilling two trunklines or a large single trunkline with two glycol lines. The dual recirculating pumps each have a 60 GPH flow rate and can support trunklines up to 125 ft long.

The key feature of this unit is the control unit and the .94 gallon glycol bath can be installed remotely keeping the condensing unit and heat exchanger out of the way. Checking the amount of glycol in the CFC-free foamed-in-place insulated stainless steel glycol bath is easy with the clear cover and can be filled through a filling port at the front. The control unit features an LCD for displaying and adjusting the temperature of the glycol line. Installation of the remote control unit with the included wall bracket.

A ⅓” HP compressor capable of 2,175 BTU/hr and 7,616 BTU/hr of heat rejection with R134a refrigerant efficiently cools the glycol with an over-sized condenser coil.

The unit is 27” long, 25-⅝” wide and 16” tall. The unit uses 18.6 amps at full load and should be hard wired to its own dedicated 30.0 amp circuit. Two different power options are available for this unit 120v/60/1-ph and 220/v/50/1-ph.

The Glastender BLC-1/3-2 Beer Line Chiller with Remote Installable Control is cETLus certified.