1 (800) 555-0666

Everest Refrigeration ETF3 71.13'' 3 Door ADA Height Worktop Freezer with Front Breathing Compressor - 22.0 cu. ft.

MPN#: ETF3
Everest Refrigeration ETF3 71.13'' 3 Door ADA Height Worktop Freezer with Front Breathing Compressor - 22.0 cu. ft.
Free Freight?
Quick Ship
$3,830.00

or Call for The Price

$3,700.51
or enjoy small payments $79.52/mo.
Lease Payment Calculate
Product Protection
Product Protection
Starting at
Reward Points
Reward Points
You will earn 3830
  • 2023 model, meets the newest EPA and DOE codes.

Everest Refrigeration ETF3 Specifications

Freezer Capacity22.0 cu. ft.
Access TypeDoors
Compressor StyleFront Breathing
Hinge LocationLeft/Right
ConstructionStainless and Galvanized Steel
BrandEverest Refrigeration
Refrigerant TypeR-290
Gauge16 Gauge
Certifications5-15P
Number of Doors3
Capacity17- 27 cu. ft.
Sections3
StyleADA Height
Voltage115 Volts
Width (in)71.13
Height (in)34.25
Depth (in)31.5
Weight348.00

Everest Refrigeration ETF3 Certifications

5-15P

5-15P

Two-pole with ground pin plug

ETL

ETL

The ETL Mark is proof of product compliance to North American safety standards.

ETL-Sanitation

ETL-Sanitation

This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

Everest Refrigeration ETF3 Description

Undercounter/Worktop Freezer, three-section, 71-1/8"W, 22.0 cu. ft. capacity, self-contained side mounted refrigeration, 16 gauge stainless steel worktop, (3) solid hinged self-closing doors (locking), (6) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, -10°F to +54°F temperature range, auto defrost, LED interior lighting, pressure relief port, stainless steel interior, stainless steel front & sides, galvanized steel bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/2 HP, 115v/60/1-ph, 5.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

Standard Features:
Refrigeration System
  • Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
  • Full-length air duct system ensures optimal circulation of cold air.
  • Large capacity, corrosion-resistant condenser and evaporator coils.
  • Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
  • Pressure relief devices allow smooth access to cabinet interior when reopening doors.
  • Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
  • Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
  • High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
  • Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
Cabinet Construction
  • Galvanized steel bottom and rear.
  • Four 5" swivel casters with locks on front set.
  • 16 gauge, high quality stainless steel worktop.
  • 2.5" thick high density polyurethane insulation.
  • Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
Lighting
  • Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
Doors
  • High strength, recessed door handles.
  • Heavy duty stainless steel interior / exterior.
  • 2.5" thick high density polyurethane insulation.
  • Frame heaters prevent exterior moisture build up.
  • Pre-installed door locks keep your items safe from theft.
  • Self-closing with adjustable torsion system for a positive seal.
  • Snap-in magnetic door gasket make cleaning and replacement an easy process.
Shelving
  • Height adjustable stainless steel clips.
  • Two epoxy coated, steel wire shelves per section.
Temperature Control
  • Multi-function digital controller with easy to read LED display.
  • Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
  • R290 models include audible overheat protection alarm for compressor and condenser coil.
Options
  • Additional shelving.
  • 3” swivel casters with locks.
  • NSF Certified Stainless Steel Double Overshelf.
  • 3.5” - 6” height-adjustable and interchangeable legs.
  • 4” high stainless steel backsplash for worktop application.

Options for Everest Refrigeration ETF3

Notes
Backsplash
Shelving
Mounting options
What is included
  • Warranty: Parts and labor: 3 years from ship date
  • Electrical Components Warranty: Electrical components: 5 years from ship date
  • Compressor Warranty: Compressor: 10 years from ship date

Everest Refrigeration ETF3 Parts

All Everest Refrigeration ETF3 Parts

Everest Refrigeration ETF3 Reviews

There are no reviews yet for this product.

Questions and Answers

Items Related to Everest Refrigeration ETF3

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Everest Refrigeration ETF3 71.13'' 3 Door ADA Height Worktop Freezer with Front Breathing Compressor - 22.0 cu. ft.
ETF3 71.13'' 3 Door ADA Height Worktop Freezer with Front Breathing Compressor - 22.0 cu. ft.
$3,830.00 $3,830.00 $3,700.51