Delfield SALD-1 Shelleymatic Salad Drier
MPN#: SALD-1
Free Freight?
Quick Ship
$4,075.00
Contact us for details
Calculate
Product Protection
Starting at
Delfield SALD-1 Specifications
| Brand | Delfield |
|---|---|
| Certifications | 5-15P |
| Exterior Finish | Stainless Steel |
| Casters | 4" locking stem casters |
| Capacity | 20 Gallon |
| Voltage | 115 Volts |
| Width (in) | 22.92 |
| Height (in) | 32.22 |
| Depth (in) | 22.92 |
| Weight | 85 |
Additional Information on Delfield SALD-1
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield SALD-1 Certifications
5-15P
Two-pole with ground pin plug
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Delfield SALD-1 Description
Shelleymatic® Salad Dryer, capacity (20) gallons, stainless steel exterior & lid, polyurethane interior, unit completely enclosed, watertight motor, 1-1/2" drain, adjustable on/off timer with cycles up to 5 minutes, cord & plug included, 4" locking stem casters, 1/6 HP, 115v/60/1-ph, 2.7 amp, NEMA 5-15P, cUL, UL, NSFShelleymatic® Commercial Salad Vegetable Dryer, capacity (20) gallons, stainless steel exterior & lid, polyurethane interior, unit completely enclosed, watertight motor, 1-1/2" drain, adjustable on/off timer with cycles up to 5 minutes, cord & plug included, 4" locking stem casters, 1/6 HP, 115v/60/1-ph, 2.7 amp, NEMA 5-15P, cUL, UL, NSFStandard Features:
- Unit has 1.50” drain
- 6’ cord and plug supplied
- Body is 18-gauge stainless steel
- Outer lid is 18-gauge stainless steel
- One year parts and 90 day labor warranty
- Lid and cover storing hooks come standard
- Inner liner is perforated durable polyethylene plastic
- Legs are 1” diameter 16-gauge stainless steel tubing
- (3) 4.00” diameter polyurethane locking stem casters
- Adjustable ON/OFF timer for drying times up to 5 minutes
- Water-tight motor and controls are mounted on the bottom of the unit
Options & Accessories:
- Additional polyethylene liner
Specifications:
Outer body is constructed of 18-gauge stainless steel. Legs are 1.00” (25mm) outside diameter, 16-gauge stainless steel tubing with 4.00” (10cm) diameter locking stem casters for mobility. Outer lid is constructed of 18-gauge stainless steel. Inner liner is a one-piece durable polyethylene plastic with 0.38” (1cm) diameter holes for proper water disbursement. Unit has a completely enclosed, water-tight motor mounted underneath the unit. Unit has a 1.50” (4cm) outside diameter drain, and an adjustable on/off timer for selection of drying cycles of up to five minutes. Stainless steel hooks are mounted on the lid and sides of the unit for storage of the lid and cord when unit is not in use. Electrical box for capacitor and timer control is mounted on the bottom of the unit. Six foot cord and plug are supplied. SALD-1 is 115 Volt, 60 Hertz single phase. SALD-2 is 230 Volt, 50 Hertz single phase.
Delfield SALD-1 Accessories
Delfield SALD-1 Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Delfield SALD-1
Salad Spinners & Dryers 19 products
