Delfield 18691PTBMP 91'' 3 Door Counter Height Refrigerated Pizza Prep Table
MPN#: 18691PTBMP
Free Freight?
Quick Ship
$11,745.00 /
Contact us for details
Calculate
Product Protection
Starting at
- 2023 model, meets the newest EPA and DOE codes.
Delfield 18691PTBMP Specifications
| Nominal Width | 91 Inches |
|---|---|
| Access Type | Doors |
| Top Type | Pizza Preparation |
| Compressor Style | Side / Rear Breathing |
| Brand | Delfield |
| Refrigerant Type | R-290 |
| Certifications | NSF |
| Number of Doors | 3 |
| Capacity | 19 - 32 cu. ft. |
| Sections | 3 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 91 |
| Height (in) | 42 |
| Depth (in) | 31.5 |
| Weight | 770.00 |
Additional Information on Delfield 18691PTBMP
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield 18691PTBMP Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Delfield 18691PTBMP Description
Refrigerated Pizza Table, three-section, 91" W, 22.82 cubic feet, (11) 1/3 pan capacity, (3) shelves, (2) 27" doors & (1) 19" door, 18 gauge stainless steel top, refrigerated pan rail, stainless steel ends, 6" casters, side-mounted refrigeration system, R290 Hydrocarbon refrigerant, (2) 1/5 HP, cUL, UL, NSF
Commercial Pizza Prep Table, three-section, 91" W, 22.82 cubic feet, (11) 1/3 pan capacity, (3) shelves, (2) 27" doors & (1) 19" door, 18 gauge stainless steel top, refrigerated pan rail, stainless steel ends, 6" casters, side-mounted refrigeration system, R290 Hydrocarbon refrigerant, (2) 1/5 HP, cUL, UL, NSF (more refrigerated prep tables and commercial refrigerators & freezers available)
Standard Features:
Standard Features:
- 8' long electrical cord
- Electronic temperature control
- Dart style quick change gaskets
- Pans and adapter bars by others
- Stainless steel removable hinged covers
- Environmentally friendly R290 refrigerant
- On/off switch and rail on/off is located behind the louver
- Pans are recessed 2" to provide proper cooling for NSF 7
- Top, sides and ends are constructed of 18-gauge stainless steel
- Front louver provides access and air flow to the condensing unit
- Three year parts and labor warranty and an additional two year compressor parts warranty
- Units are mechanically cooled with diestamped openings to accommodate 12" x 20" hotel pans or fractional pans
- High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit
Options & Accessories
- Lock
- 6" legs
- 4" casters
- Tray racks
- Laminate end
- Laminate back
- Stainless steel back
- Legs, set of four or six
- Cutting board (.5" x 20")
- Laminate facing (full front)
- Fan assist package for rail
- Additional shelf (specify door size)
- Celsius readout for electronic control
- Cheese grates with removable catch pans
- 18" deep single tier stainless steel overshelf
- 19", 27" or 32" wide refrigerated drawers (2) high, holds 6" deep pans
- 19", 27" or 32" wide refrigerated drawers (3) high, holds 4" deep pans
Specifications
Exterior Top: Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5cm) high square nosing at the front. Top has a mechanically cooled refrigerated raised rail at the rear with openings to accommodate pans (provided by others). Rail interior is 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans recessed 2" (5cm) at 86°F ambient room temperature, meeting NSF 7 requirements. Exterior Back and Bottom: 24-gauge galvanized steel. Exterior ends are finished with stainless steel. Base Interior: Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (64cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. End of base has a machine compartment with condensing unit installed. Door(s): 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Refrigeration System: R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature. Interior cabinet is cooled with mullion style blower coils (coated) with expansion valves mounted between each door/drawer section for even air and temperature control. Electronic temperature controls and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Electronic control for base reads air temperature. Electronic control for rail displays temperature for set point purposes only. Display does not reflect air or product temps in unit. On/Off switches for rail and base are located behind the louvered panel.
Delfield 18691PTBMP Accessories
Delfield 18691PTBMP Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Delfield 18691PTBMP
Commercial Dough Retarding Box 1 products
Pizza Cutters 79 products
Commercial Kitchen Pizza Ovens 316 products
Commercial Pizza Pans 369 products
Commercial Pizza Peels 114 products
Pizza Screens 110 products
Pizza Stands 11 products
