Beverage Air SPE60HC-24M-STL 60'' 2 Door Counter Height Mega Top Refrigerated Sandwich / Salad Prep Table

Beverage Air SPE60HC-24M-STL Description

Mega Top Refrigerated Counter, with see-thru lids, two-section, 60"W, 16.02 cu. ft. capacity, (2) doors, (4) shelves, stainless steel top with opening for (24) 1/6 size pans, 10" cutting board, stainless steel exterior top, front, sides & doors, galvanized steel exterior bottom and back, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4" deep, tops will accommodate 6" deep pans) R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Perfect for slicing and dicing, this Beverage Air SPE60HC-24M-STL Elite Series? Mega Top Refrigerated Counter also features chilled food storage compartments for absolute freshness. This worktable is 37.63 inches tall, 60 inches wide, and 37.88 inches deep.

• SPE Elite Series - Mega Top with See-Thru Lid
  • Fifty percent greater pan capacity than the all around standard prep table. 
  • Features enhanced refrigeration system and new and improved grille system for better airflow and less temperature gradient.
  • Improved design provides better airflow management and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket.
  • Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.
• Cabinet Construction
  • Cabinet back and bottom are constructed of galvanized steel. 
  • Interior liner is made of aluminum for superior resistance to corrosion.
  • Six-inch casters, 2 with brakes, are standard. Legs are available as an option.
  • A plug in type vinyl magnetic gasket is attached to each door for positive seal. 
  • Removable hoods and insulated lid assemblies are made of matching stainless steel. 
  • Cabinet insulation is CFC free foamed-in-place polyurethane of two-inch minimum thickness. 
  • Exterior construction includes heavy-duty stainless steel finish on front, sides, top, door(s) and grille. 
  • Cutting board supplied with cabinet is 10” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning. 
  • Two epoxy-coated steel wire shelves per section are supplied as standard. Pans furnished are 4” deep and made of polycarbonate plastic.
  • Doors are mounted to face of cabinet on cartridge style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. 
  • Door handle is made from extruded aluminum with a black anodized finish. It is contoured to permit easy opening of doors with fingers from both top and bottom of handle.
• See-Thru Lid Construction
  • Features 1-piece hinge with hydraulic lift. Self-closing lid features variable set points for height variations.
  • Note: If sides are exposed to customer, side guards are required.
• Refrigeration System
  • More robust refrigeration system provides added capacity and efficiency. 
  • Automatic condensate evaporator is provided to eliminate the need of floor drains. 
  • Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. 
  • Forced air over the condenser is drawn through grille under door as well as the back and bottom of cabinet. 
  • Systems are designed using CFC free R134a refrigerant and capillary tube between condenser and evaporator. 
• Available Options
  • Night covers
  • Shelf dividers
  • Dressing holder
  • Crumb catchers
  • Solid/tubular tray slides
  • Composite cutting boards
  • Overshelf-side guard kit with LED lighting
• Electrical Connection
  • Units pre-wired at factory and include 8’ long cord and plug set.