Beverage Air DW79HC-B Bottle Cooler

Bottle Cooler, flat top, 80"W x 26-1/2"D x 33-3/4"H, 24.1 cu. ft., deep well design, (3) sliding lids, (5) adjustable epoxy coated wire dividers, case capacity: 32 cases (12 oz. bottles) or 45-3/4 cases (12 oz. cans), electronic controls, bottle cap opener & cap catcher, stainless steel top, galvanized interior, black painted steel exterior, self-contained refrigeration system, R290 hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

To quickly cool bottled or canned beverages a purpose-built unit like the DW79HC-B Bottle Cooler from Beverage Air is an excellent choice. This unit has a wear-resistant black vinyl exterior finish on steel and includes features that make serving beverages as convenient as possible. This unit has 24.1 cu. ft. of capacity that can hold 45 ¾ cases in 12 oz. cans or 32 cases in 12 oz. bottles.

This unit features three sliding stainless steel lids that easily glide to provide immediate access to beverages. Beverages can then be served on the stainless steel countertop that comes complete with glass stops to prevent accidents. Opening bottles pulled from this unit can be done in one fluid motion thanks to the bottle cap lifter and catcher unit. This also stores the bottle caps to prevent them from becoming a safety hazard. Inside, five epoxy-coated wire dividers are included to keep bottles and cans organized. To get beverages to a temperature between  36°F and 40°F quickly, this unit features high RPM cooling fans.

This unit comes with a self-contained refrigeration system that utilizes a ¼ HP compressor putting out 1702 BTU/hr of cooling. The epoxy-coated evaporator in this unit makes sure efficient cooling is provided in a reliable manner for many years with minimal service. Fully electric controls will keep the temperature constant while consuming as little power as possible. An automatic non-electric defrost system makes sure the unit runs efficiently while minimizing downtime. Eco-friendly R290 refrigerant is used by this unit to meet all environmental regulations.

Power is supplied by a factory-installed 8-foot power cable with a NEMA 5-15P plug set for use with standard 115v/60/1-ph at 2.5 amps.