Bakers Pride Y-800BL-DSP Super Deck Series Gas Pizza Bake Oven Single Deck, 120 Volts - 120,000 BTU

Super Deck Series Display Pizza Deck Commercial Oven, gas, 66"W x 44"D deck, (1) 7-1/2" high section, brick lined, with FibraMent® deck, microslide heat controls range 300°F - 650°F, stainless steel exterior finish, 30" painted legs, 120,000 BTU, cETLus, ETL-Sanitation

Powerful, efficient, and striking, this 84" single-compartment Bakers Pride Y-800BL-DSP gas deck oven with a 120,000 BTU per hour cooking power. Packed with everything you need to keep lines of hungry guests satisfied with delicious pizza, this commercial deck-type oven features a 7.5" cooking chamber and a spacious 66" wide, 44" deep, and 2" thick Lightstone fibrament deck.

This deck-type pizza oven is dependable and well-built, with a stainless steel exterior finish that boasts rust resistance and excellent insulation that helps the outside stay cool to the touch when the oven is in use. The aluminized steel interior is durable and ready for high-heat cooking.

Available in natural gas and liquid propane configurations, this pizza deck oven can cook pizzas at 300 to 650 degrees Fahrenheit that you can adjust using the microslide controls. The heavy-duty flame diverters distribute the heat evenly across the deck so every product gets enough heat to cook properly regardless of where it is placed. These flame diverters even slide out so you can remove and access them with little effort.

This commercial pizza oven features a brick-lined ceiling that retains heat efficiently, reducing gas consumption while enhancing the taste and the flavors of your pizza. With the independent top and bottom heat controls, it is easier to get the bake quality you want for your crust and toppings. The heavy-duty doors help keep the oven running efficiently and with the spring balance action, they are lighter and easier to open.

The pizza deck oven is as stylish as it is functional--from the dome top accent and black housing and door panel trims to the hardwood door handles. If you need the oven to match your brick, stone, or tile decor or interior design, the front and side skirts allow you to do so with ease. The gas controls including the valve, regulator, and pilot safety are tucked into a single front housing while the 3/4" NPT gas connection is located at the left side or the rear of the oven.

This commercial deck-type oven stands on two pairs of 30" steel Bakertone legs. If you need to increase your baking capacity, the 0.25" angle fully welded iron frame on this unit makes it easy for you to stack one more oven so you don’t have to use up additional floor space.

The Bakers Pride Y-600BL Super Deck Series gas deck oven meets NSF, CSA, and CE qualifications. Enjoy a two-year limited warranty with your purchase. Looking for additional components or accessories for the unit? Check out the selection available below.

• Stackable
• Dome top accent
• Two-year limited warranty
• Fully insulated throughout
• Choose overall width: 78" or 84"
• Heavy-duty, slide-out flame diverters
• Spring-balanced, fully insulated doors
• Choose deck area: 60" x 36" or 66" x 44"
• 120,000 total BTUH with natural or LP gas
• 300–650°F (148–343°C) temperature range
• Front and side skirts for mounting tile or stone
• Left-side or rear 3/4" (19 mm) NPT gas connection
• All stainless steel exteriors, aluminized steel interiors
• Heavy-duty steel legs finished with durable Bakertone
• 8" (203 mm) deck height (7.5" (191 mm) for brick-lined)
• Independently controlled top and bottom heat dampers
• 2" (51 mm) thick Lightstone fibrament or brick-lined decks
• Front- or side-mounted gas controls with valve, regulator, and pilot safety
• Choose stainless steel or trimmed with black-powder-coated control panels and hardwood door handles

• Legs with casters
• Cordierite or steel decks
• Stainless steel wood chip box
• Stainless steel leg covers (per pair)
• Special-height legs (per set of four)
• Automatic oven starter (comes with 120v plug)
• Side-mounted controls (Specify when ordering)
• Draft flue for direct vent (not available on CE units)
• Deck brush and scraper (48" (1219 mm) long with wood handle)